ENGLISH
5
GettingStarted Connections Playback Troubleshooting SpecicationsConnections
Playback
START
STOP
SIZE
SPEED
The TT5005 can play analog records.
Playback
Preparations
Preparing to Play a Record
1
Open the dust cover and place an analog record on
the rubber mat.
•Use the EP adapter when playing an EP record.
2
Set the record’s playing speed using SPEED.
GSettableItemsH
j 33
33-1/3 rpm
h 45
45 rpm
3
Set the record’s size using SIZE.
GSettableItemsH
30
30 cm
17
17 cm
4
Remove the stylus cover.
Stylus cover
Playing an Analog Record
Auto Start
Press START.
The record starts playing automatically.
•When the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
Manual Start
Using the nger lift, move the tone arm to the position at
which you want to start playing and lower it carefully.
•When the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
NOTE
•Be careful not to scratch the record when moving the tone arm.
•Do not touch the tone arm or turntable or turn off the power while
a record is playing. Doing so can disrupt the sound or damage the
record.
•The auto start function cannot be used for 25 cm records. Records
of this size should be started manually.
•The auto return function is activated when the tone arm reaches a
specific point near the center of the record. In the case of a non-
standard record with grooves extending beyond this point, the auto
return function may be activated before the record has stopped
playing.
Stopping a Record During Playback
Press STOP.
Playback stops and the tone arm returns to its original position.
1.TT5005N_ENG_NEW.indd 5 2012/04/13 16:47:26
Comments to this Manuals