Marantz PS-17 User's Guide download pdf (Page 30)

ENGLISH

ON SCREEN DISPLAY

INFOMATION

The on-screen display, which can be activated by the Main unit or

remote, appears on the TV screen to show the current setting status

of the PS-17.

These are available, when OSD INFO setup is selected “ENABLE”.

Note:

Each video input function is set PAL or NTSC for TV format of OSD. If

this setup does not meet the video input signal, character of OSD can

notsynchronize.

So you can select these format function by function.

Press OSD button ⁄7 on the remote controller for 3 seconds or more.

“PAL” or “NTSC” will be shown on the FL display of PS-17, press OSD

button ⁄7 again to change the TV format.

The indicator on FL display will change “PAL” ﬁ “NTSC” ﬁ “PAL” ﬁ .

This setup is memorized with each video input function.

1. GENERAL INFORMATION

When the OSD button is pressed, the current settings are displayed

on the TV monitor.

Press the OSD button again, and this display will disappear.

This information will disappear automatically in about 10 seconds

after the button is pressed.

VIDEO: Displays the current video source being

selected with the function selector

TV, LD, DVD, VCR1, DSS.

AUDIO: Displays the current audio source being

selected with the function selector

PHONO, CD, TAPE or CD-R.

DIGITAL INPUT: Displays the selected digital input .

DIG-1, DIG-2, DIG-3 , DIG-4 , DIG-5 or DIG-6.

DIGITAL OUTPUT: Displays the digital output that is being used

for recording

SOURCE , DIG-1, DIG-2, DIG-3 , DIG-4 , DIG-

5, DIG-6, OFF.

SURR-MODE: Displays the current surround mode

e.g.

AUTO, DOLBY, 6.1, SRS, 5-STEREO,

STEREO, S-DIRECT or 6CH INPUT.

DH ROOM: Displays the current DOLBY HEADPHONE

ROOM DH1, DH2, DH3 or BP (Bypass).

MAIN VOLUME: Displays the current volume level.

The volume level moves higher to right of the

display, and the pointer changes to “ ” at 0

dB.

Note:

• The On-Screen Display signals can be output from the TV MONI

composite video (RCA) output and the TV MONI, S-Video output

jacks.

• With some video equipment or software, the On-Screen Display

characters may be distorted due to noise or tracking adjustment

error.

2. FUCTION SELECT & SURROUND MODE

When a function or surround mode button is selected:

VIDEO: Displays the current video source. When DSS/TV, LD,

DVD, VCR or AUX is selected with the function selector,

both AUDIO and VIDEO shows the same name.

AUDIO: Displays the current analog audio input source.

DIGITAL: Displays the current digital input source.

SURR-MODE: Displays the current Surround mode as follows;

e.g.

AUTO, DOLBY, 6.1, SRS, 5-STEREO, STEREO, S-

DIRECT or 6CH INPUT.

LFE LEVEL: Displays the current LFE LEVEL.

3. MASTER VOLUME CONTROL

Displayed when the MASTER volume is varied or a buttons of the

remote handset is pressed.

The box display indicates the 0 dB level with a solid box “

”.

4. MUTE

When the MUTE ⁄3 button is pressed on the remote control, “MUTE”

will be shown on screen. Pressing MUTE button again will clear the

display, or adjust the volume.

5. SLEEP TIMER

When the SLEEP button is pressed, the setting on or off and the

remaining time of the sleep timer function are displayed.

You can change the mode between on, off and the amount of time to

elapse before the unit will shut itself off by cycling the SLEEP button.



DH ROOM DH1

MA I N



LFE LEVEL 0d B



MA I N



1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Comments to this Manuals

No comments

Marantz PS-17 User's Guide Page 30

Comments to this Manuals

Related products and manuals for AV receivers Marantz PS-17