Marantz SR4300 User's Guide download pdf (Page 14)

ENGLISH

⁄6 Numeric buttons 1 to 9 / Surround

mode buttons

Numeric buttons (1 - 9)

These buttons are used to enter figures in the selection of a tuner

preset station and station name preset or to set select a CD track

number, etc.

The functions of these buttons are dependent on the function button

selected.

Surround mode buttons (when AMP mode is selected)

These buttons are also used to select the surround mode.

Note:

• The M-CH ST button is used to 6-stereo mode.

⁄7 0 / A/D button

0 button

This button is used to enter the number “0”

A/D button (when AMP mode is selected)

This is used to switch between the analog and digital inputs.

⁄8 MENU button and MENU OFF button

MENU button is used to enter the menu functions. Use the menu

functions to setup SR4300. MENU OFF button is used to return

original display from menu functions.

⁄9 Cursor buttons ( , , , , OK)

Use these button when operating the SETUP MENU functions.

: Moves the cursor left

: Moves the cursor right

: Moves the cursor up

: Moves the cursor down

OK : Enters to the SETUP MENU or Confirms the setting

¤0 MAIN VOLUME (Up) / (Down)

buttons

Adjusts the overall sound level. The front, surround, center and

subwoofer channel volumes controlled by these buttons

simultaneously.

¤1 CONTROL buttons

These buttons are used when operating the CD player, TAPE deck,

etc. The function of these buttons are dependent on the function

button selected.

¤2 ATT (attenuate) button

When the input signal is too high and the voice distorts even by

throttling the SR4300 VOLUME control, turn on this function. “ATT” is

indicated when this function is activated.

The input level is reduced. Attenuation is invalid for use with the output

signal of “REC OUT”.

REMOTE CONTROL RANGE

The distance between the transmitter of the remote control unit and

the IR SENSOR of the SR4300 should be less than about 5 meters. If

the transmitter is pointed to a direction other than the IR SENSOR or if

there is an obstacle between them, remote control may not be

possible.

Remote-controllable range

LOADING BATTERIES

When you use RC4300SR for the first time, you have to install the

batteries. The RC4300SR requires 2 AAA-batteries (2 x 1,5 V) to

function.

Note

• Attached batteries are to check basic function of remote control

unit.

Remove the back cover.

Insert the new batteries (AAA type) with correct (+) and (–)

polarity.

Close until it clicks.

Remote control unit (RC4300SR)

60°

SR4300

Approx. 5 m

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Comments to this Manuals

No comments

Marantz SR4300 User's Guide Page 14

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR4300