Marantz SR5500 User Manual download pdf (Page 26)

ENGLISH

The signal cannot be converted from the

component to the video or S-video.

Notes of OSD menu:

• The setup menu can be displayed through all

video out (COMPONENT, S-VIDEO, VIDEO).

• The setting informations (e.g. volume setting) are

displayed through all video out when the VIDEO

CONVERT function are set ENABLE.

Note:

No setting information is displayed when the

signal is emitted from the COMPONENT IN to

COMPONENT OUT.

• The setting informations (e.g. volume setting) are

displayed through the S-VIDEO or VIDEO out

when the VIDEO CONVERT function are set

DISABLE. When the S-VIDEO and VIDEO

outputs are used simultaneously, the setting

informations are displayed through the S-VIDEO

out only.

SELECTING THE SURROUND MODE

Example: AUTO SURROUND

To select the surround mode during playback,

press the SURROUND MODE button on the front

panel or the Surround mode buttons on the

remote.

VIDEO CONVERT

When this function is activated, the video or

S-video signal can be emitted from the video, S-

video or component video output terminal.

To activate this function, select VIDEO CONVERT

in PREFERENCE menu and set ENABLE.

Notes:

• The component video signal is emitted only from

component video output terminal.

When the video equipment is connected by

component terminal, connect the monitor and

SR5500 by the component terminal.

• This function is unavailable for the REC out

terminal.

•

This function is unavailable for the still picture, fast

forward and reverse playing of the video component.

• If, while attempting to use the video convert

feature, the SR5500 cannot synchronize with the

display device, “NO SIGNAL” appears on the

monitor, or noise is generated, this feature cannot

be used. All of these signs are caused by

equipment incompatibility; there is nothing

wrong with the SR5500.

In such case, set VIDEO CONVERT in the

PREFERENCE menu to DISABLE. Also, connect

the video input signal to the display device via the

MONITOR OUT terminal under VIDEO and the

S-video input signal to the display device via the

MONITOR OUT terminal under S-VIDEO.

Example:

Monitor is connected with the component.

Monitor is connected with the video or S-video.

BASIC OPERATION

(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must

first select the input source on the SR5500.

Example : DVD

To select DVD, turn the INPUT FUNCTION

SELECTOR knob on the front panel or simply

press the DVD button on the remote.

After you have selected DVD, simply turn on the

DVD player and play the DVD.

• As the input source is changed, the new input

name will appear momentarily an OSD

information on the video display. The input

name will also appear in the display, on the

front-panel.

• As the input is changed, the SR5500 will

automatically switch to the digital input,

surround mode, attenuation, and night mode

status which were entered during the

configuration process for that source.

• When an audio source is selected, the last video

input used remains routed to the VCR1 & DSS/

VCR2 Outputs and Monitor Output. This

permits simultaneous viewing and listening to

different sources.

• When a Video source is selected, the video

signal for that input will be routed to the Monitor

Output jacks and will be viewable on a TV

monitor connected to the SR5500.

If a component video input is connected to the

DVD or DSS component inputs, it will be routed

to the Component Video Output. Make certain

that your TV is set to the proper input to view the

signal.

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using the

VOLUME control knob on the front panel or VOL

/ buttons on the remote.

To increase the volume, turn the VOLUME knob

clockwise or press VOL

button on the remote, to

decrease the volume, turn counterclockwise or

press VOL button on the remote.

Notes:

• The volume can be adjusted within the range of –

∞ to 18 dB, in steps of 1 dB.

•

However, when the channel level is set as described

on page 19, if the volume for any channel is set at

+1 dB or greater, the volume cannot be adjusted up

to 18 dB.

(In this case the maximum volume adjustment

range is “18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS &

TREBLE) CONTROL

During a listening session you may wish to adjust

the Bass and Treble Control to suit your listening

tastes or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS or BASS

on the remote.

To adjust the treble effect, press TREBLE or

TREBLE on the remote.

Note:

• The tone control function can work in the AUTO

Surround, Stereo, Dolby PL

IIx

, DTS, DTS-ES,

and Multi Ch. Stereo mode.

CH.SEL LIP.SYNC

PTY

SUB-T/ATT

AUDIO

INPUT/DISC+

F.DIRECT

RDS

TUNE/SEARCH

T-MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN/V-OFF

7.1CH IN

STEREO

MCH-ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES VIRTUAL

321

654

VOL.

MAIN

SLEEP

MUTE

AMP

TUNER

TAPE

CDR/MD

DVD

POWER

VCR1

DSS/VCR2

AUX1

SURROUND

AV SURROUND RECEIVER SR5500

DOWN

VOLUME

INPUT SELECTOR

POWER ON / STANDBY PHONES

STANDBY

MUTE

MULTI

M. SPEAKER B

7.1CH INPUT

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

AUX 1 INPUT

AUDIOS-VIDEO VIDEO L R

VIDEO

or S-VIDEO

or component

component

SURROUND

AV SURROUND RECEIVER SR5500

DOWN

VOLUME

INPUT SELECTOR

POWER ON / STANDBY PHONES

STANDBY

MUTE

MULTI

M. SPEAKER B

7.1CH INPUT

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

AUX 1 INPUT

AUDIOS-VIDEO VIDEO L R

VIDEO

or S-VIDEO

VIDEO

or S-VIDEO

SURROUND

AV SURROUND RECEIVER SR5500

DOWN

VOLUME

INPUT SELECTOR

POWER ON / STANDBY PHONES

STANDBY

MUTE

MULTI

M. SPEAKER B

7.1CH INPUT

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

AUX 1 INPUT

AUDIOS-VIDEO VIDEO L R

VIDEO

or S-VIDEO

component

TUNE/SEARCH

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN/V-OFF

7.1CH IN

STEREO

MCH-ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES VIRTUAL

DTS

PURE DIRECT

AUTO

321

654

T.TONE

MENU OFF

SET UP/

ENTER

SURROUND

AV SURROUND RECEIVER SR5500

INPUT SELECTOR

POWER ON / STANDBY PHONES

STANDBY

MULTI

M. SPEAKER B

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

MODE

DISP MULTI AUT O TUNED

SLEEP

SURR

AUTO

DIRECT

OSD

VOL.

MAIN

SLEEP

MUTE

AMP

TUNER

TAPE

CDR/MD

DVD

VCR1

DSS/VCR2

ENTER

AUX1

DOWN

VOLUME

MUTE

7.1CH INPUT

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

EAK ANALOG

DIGITAL

ATT

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

AUX 1 INPUT

AUDIOS-VIDEO VIDEO L R

SR5500U DFU_01_ENG 2_2 04.8.2, 4:13 PMPage 23 Adobe PageMaker 6.5J/PPC

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Comments to this Manuals

No comments

Marantz SR5500 User Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR5500