Marantz SR7300OSE User Manual download pdf (Page 40)

ENGLISH

Each time the tuner finds a station, scanning will pause and the

station will be played for five seconds.

During this time, the following operations are possible.

1) The band can be changed by TUNER button .

2) The tuning mode can be changed by MODE button.

If no button is pressed during this period, the current station is

memorized in location Preset 02

If you wish to skip the current station, press the TUNING button

during this period, this station is skipped and auto presetting

continues.

Operation stops automatically when all 50 preset memory

positions are filled or when auto scanning attains the highest end

of all bands. If you desire to stop the auto preset memory at

anytime, press the CLEAR button.

MANUAL PRESET MEMORY

(Using the SR7300)

Tune into the radio station you desire (Refer to the “MANUAL

TUNING” or “AUTO TUNING” section).

Press the MEMORY button on the front panel. “– –“ (preset

number) starts blinking on the display.

Select the preset number by pressing the TUNING or button,

while this is still blinking (approx. 5 seconds)

Press the MEMORY button again to enter. The display stops

blinking.

The station is now stored in the specified preset memory location.

(Using the remote control unit)

Tune into the radio station you desire (Refer to the “MANUAL

TUNING” or “AUTO TUNING” section).

Press the MEMO on the remote unite. “– –“ (preset number) starts

blinking on the display.

Enter the desired preset number by pressing numeric buttons.

Note:

• When entering a single digit number (2 for example), either

input “02” or just input “2” and wait for a few seconds.

RECALLING A PRESET STATION

(Using the SR7300)

Press the F/P button to show the preset station on the display.

Select the desired preset station by pressing the TUNING or

button on the front panel

(Using the remote control unit)

Press the 4 or ¢ button to select the desired preset station, or

input your desired preset channel with numeric buttons on the

remote.

PRESET SCAN

(Using the remote control unit)

Press the P.SCAN on remote.

“PRESET SCAN” appears on the display and then the preset

station with the lowest preset number is recalled first.

Preset stations are recalled in sequence (No.1 → No.2 → etc.) for

5 seconds each.

No stored preset number will be skipped.

You can fast forward the preset stations by pressing the ¢

continuously.

When the desired preset station is received, cancel the preset

scan operation by pressing the CL button or P.SCAN on the

remote.

CLEARING STORED PRESET STATIONS

You can remove preset stations from memory using the following

procedure.

Recall the preset number to be cleared with the method described

in “Recalling” a preset station.

Press the MEMORY button on the front panel or press MEMO button

on the remote.

Stored preset number blinks in the display for 5 seconds. While

blinking, press the CLEAR button on the front panel or press CL

button on the remote.

“xx CLEAR” appears on the display to indicate that the specified

preset number has been cleared.

Notes:

• To clear stored all preset stations, press and hold the CLEAR

and the F/P buttons for two seconds.

AV SURROUND RECEIVER SR7300

SURROUND

MEMORY

TUNING

F/P

CLEAR

S-DIRECT M

A/D7.1CH INPUTSPEAKRS A/B

POWER ON/STANDBY

PHONES

ENTER

STANDBY

DSS/VCR2

AUX1 AUX2

VCR1

DVD

CD-R

TAPE

SELECT

4. 3.

MEMORY

TUNING

MODE

F/P

CLEAR

S-DIRECT MULTIROOM

A/D7.1CH INPUTSPEAKRS A/B

DSS/VCR2

AUX1 AUX2

VCR1

DVD

CD-R

TAPE

TUNER

2. 1.

AV SURROUND RECEIVER SR7300

SURROUND

MEMORY

TUNING

F/P

CLEAR

S-DIRECT M

A/D7.1CH INPUTSPEAKRS A/B

POWER ON/STANDBY

PHONES

ENTER

STANDBY

DSS/VCR2

AUX1 AUX2

VCR1

DVD

CD-R

TAPE

SELECT

2. 3.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

Comments to this Manuals

No comments

Marantz SR7300OSE User Manual Page 40

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR7300OSE