Marantz MV8300 Hi-Def User's Guide download pdf (Page 35)

EN 35

Input receiving channel number

The guide channel

number, which is

assigned to the TV or

cable station for the

PlusCode number

that you entered in

step 3, will appear

automatically on the

Guide Channel Set Up screen.

Press

to input the number of the channel on

which the broadcast for the PlusCode number is

received on the VCR or cable box, then press

OK.

● The Guide Channel Set screen appears only

when you input the PlusCode number of a

station for which the guide channel number has

not been set previously.

● If you receive your channels with a cable box

and if you have properly set your Controller,

“CABLE CH” appears in place of “VCR CH”. If

not, refer to pages 15 – 17.

In that case, it is possible to change the channel

by 10 channels by pressing and holding

Check program data

The PlusCode

number you entered

and the

corresponding timer

recording program is

displayed on the

Program screen.

Check to make sure it

is accurate.

● To change the start/stop time, date or channel

setting, press the corresponding buttons to

change the settings; START +/–, STOP +/–,

DATE +/–, TV/VCR CH +/–.

● To timer-record daily or weekly serials, press

DAILY (number “8”) or WEEKLY (number “9”).

“MON – FRI”, “MON – SAT”, “SUN – SAT” or

“EVERY _ _ _” appears on the Program screen.

Pressing the button again makes each

corresponding display disappear.

● For the “SOURCE” setting, refer to page 39.

● If you made a mistake, press BACK to access

the VCR Plus+ screen again and input the

correct PlusCode number.

Set recording speed

Press REC SPEED to set the recording speed.

IMPORTANT

If you have moved to a different area or if a broadcasting

station’s channel number has been changed, the wrong

VCR CH or CABLE CH number will be displayed on the

Program screen in step 5. When this happens, set the

correct guide channel number for that station. (墌 pg. 36,

“Changing VCR Plus+ Setting”)

NOTES:

●

Even if a power failure occurs, the VCR keeps your timer

programs. However, the clock time is lost if it lasts for more

than 10 minutes.

As a result, when the power is supplied again to this VCR

after the power failure, the following will take place.

1. This VCR starts Auto Clock Set automatically to restore the

clock time.

2. If the clock time is restored correctly and “AUTO TIMER” is

set to “ON”, each timer program you have made will start

at its start time unless its end time has elapsed.

●

If the tape reaches its end during timer recording, “

‰

”, “ ”,

and “

” blink.

●

To timer-record cable channels received through a cable box,

be sure to keep the cable box turned on.

Return to normal screen

Press

to move the arrow to “CONFIRM”,

then press OK.

“PROGRAM COMPLETED PRESS [TIMER] TO

ENTER TIMER STANDBY MODE” appears on the

screen, then press OK to return to normal screen.

Engage timer recording standby mode

Press TIMER (‰).

The VCR turns off automatically and “‰” is

displayed on the front display panel.

To use the VCR while it is in timer recording standby

mode

Press TIMER (‰) to cancel the timer recording standby

mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby

mode again by pressing TIMER (‰) after you use the VCR;

otherwise, you cannot record the broadcasts you want.

● When “AUTO TIMER” (墌 pg. 57) is set to “ON”, the

timer recording standby mode is automatically

engaged when the VCR is turned off. It is temporarily

canceled when the VCR is turned on. You do not have

to press TIMER (‰) to engage or disengage the timer

recording standby mode.

THEN PRESS [OK]

GUIDE CH 12

VCR CH

– –

SELECT WITH ARROW KEYS

SELECT

EXIT

FUNCTION SET UP

INITIAL SET UPTUNER SET UP

CLOCK SET GUIDE CHANNEL

OTHER

CONFIRM CANCEL

10:00 PM

STD (SP)

12/24/03 (WED) 12 CH

CATVEVERY WED

8:00 PM

START TIME

PLUSCODE NO.

12345

STOP TIME DATE

REC SPEED DAILY/WEEKLY

SOURCE

SET PROGRAM WITH [+/–, REC SPEED,

8=DAILY, 9=WEEKLY] THEN PRESS "CONFIRM"

START STOP DATE CH

EXIT

PROG.

TIMER PROGRAM

MV8300_U1B-EN34-41 4/1/3, 2:35 PM35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Comments to this Manuals

No comments

Marantz MV8300 Hi-Def User's Guide Page 35

Comments to this Manuals

Related products and manuals for Cassette players Marantz MV8300 Hi-Def