14
ENGLISH
RECORDING
55
55
5
To start recording, press PLAY on the selected source.
➔ The CD-Recorder automatically starts to record. The re-
cording time left appears on the display.
• If, however, you start the source during a track, CD-
SYNC recording starts at the beginning of the next track
or after 2.7 seconds of silence in analog recordings.
• To check the elapsed recording time, press
TIME
(14) or
DISPLAY
(77). (This can also be done during recording)
• The recorder stops automatically.
66
66
6
To stop recording manually, press
99
99
9 (5, 87).
• If 9 (5, 87) was pressed within 3 seconds after pressing
PLAY
on the selected source, no recording will take
place.
• To interrupt recording, press 2/;
(6) or ; (82).
To resume, press 0 (4) on the CD-Recorder.
After recording the display will show for sev-
eral seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- With , recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds si-
lence. With
, the auto stop mode is
disabled.
- MAKE CD will automatically finalize the CD-R(W) after syn-
chronized recording. It takes about 1 minute to start auto fi-
nalizing after finish recording the last track. (WAIT appears
on the display.)
- The recorded sound might be distorted when you adjust the
recording level to set above 0dB for digital recording and -
12dB for analog recording. The default setting of recvolume
for digital is 0dB and analog is -12dB when this CD-Recorder
is shipped.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
CD-SYNC
The CD-SYNC feature enables you to make fast and easy re-
cordings of a CD. Track increments are automatically detected
from the source material. Track increments cannot be added
manually. In analog source material a silence (<- 55dBFS) of
2.7 seconds or more is automatically detected as a track incre-
ment.
11
11
1
Make sure the disc is absolutely free of scratches and
dust particles.
22
22
2
Connect the cable from an external CD player to the CD-
Recorder. (see INSTALLATION from page 5 to 6.)
33
33
3
Press
INPUT
(9) repeatedly until the selected source,
appears on the display (depending on the digital connec-
tion used):
➔
, or lights up and ,
or appears on the display.
44
44
4 With the CD-Recorder stopped, press
REC MODE
(10)
four times: if you wish to record a complete disc or pro-
gram.
➔
start to flash and the display shows
.
• If or flashes, the digital connection is incor-
rect.
Note:
You can adjust the recording level by rotating the
REC LEVEL/
SELECT
(13).
DIGITAL RECORDING : +6dB ~ –63dB
ANALOG RECORDING : 0dB ~ –63dB
The numbers between parentheses refer to the fold-out.
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
HEADPHONE
CD RECORDER/CD PLAYER CDR500
PROG
FINAL
TEXT
LEVEL
TIME
CDPLAY MODECDR
INPUT
ERASE
POWER
IR
STANDBY
010
PUSH ENTER
REC LEVEL/SELECT
Recordable
ReWritable
MENU
STORE
REC
MODE
CANCL
DELETE
y
yre
CDR500N P01-14 (E) 9/7/00, 5:12 PM14
Comments to this Manuals