Marantz SA8004 Owner's Manual download pdf (Page 27)

Getting started

Basic connections Basic operation Speciﬁcations IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting

ENGLISH

Getting started

Basic connections Basic operation Speciﬁcations IndexAdvanced connections Advanced operations Explanation of terms TroubleshootingTroubleshooting

If a problem occurs, ﬁrst check the following:

1. Are the connections correct?

2. Is the unit being operated as described in the owner’s manual?

If this unit does not operate properly, check the items listed in the table below. If the problem persist there

may be a malfunction.

In this case, disconnect the power immediately and contact the retail outlet.

Problem Cause Corrective action Page

The disc fails to rotate. • The power cord is pulled out of

the socket.

• Insert the power cord plug

into the socket.

• Power to this unit is not ON. • Turn the power to this unit

ON.

• The disc is not placed in the

correct position on the disc

tray.

• Place the disc in the disc tray

correctly.

• The disc is placed in upside

down. (The disc is placed in

with the label facing down).

• Place the disc in the disc tray

correctly.

The disc stops rotating

in mid-operation.

• The disc is dirty. • Clean the disc’s surface. 4

• The disc is scratched. • The disc may be unable to

be played if it has a lot of

scratches.

–

• The disc is warped. • The disc may be unable to be

played if it is badly warped.

–

The disc is rotating but

no sound is heard.

• The ampliﬁer and speakers are

not connected correctly.

• Connect the cables correctly.

(See the instruction manual

for the ampliﬁer.)

• The ampliﬁer power is not ON. • Turn ON the power to the

ampliﬁer.

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer’s function or

selector switch is not set to

“CD” or “AUX” or such (to

whatever you have connected

this unit to).

• Switch the ampliﬁer’s

function or selector switch

to “CD” or “AUX” or such

(to whatever you have

connected this unit to).

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer’s volume control

is set at the minimum level.

• Adjust the ampliﬁer volume.

(See the instruction manual

for the ampliﬁer.)

–

Problem Cause Corrective action Page

Remote control

operation is not

possible.

• The distance between this unit

and the remote control is too

great.

• Move closer to this unit, and

operate the remote control

within the operating range.

• There is an obstacle between

this unit and the remote

control.

• Remove the obstacle. 4

• The remote control’s batteries

are dead.

• Replace all batteries with

new ones.

• A strong light is hitting the

unit’s sensor window.

• Do not let strong light hit the

sensor window.

• The switch on the back of the

REMOTE CONTROL is on

EXTERNAL.

• When using this unit

independently, set the switch

to INTERNAL.

CD-R/CD-RW disc

cannot be played.

• The disc is placed in upside

down.

• Place the disc in the tray

correctly.

• The information recorded is

not in an audio (CD-DA) format.

Or the MP3/WMA ﬁle was not

properly recorded.

• Record correct information

that is compatible with to this

unit.

Cannot switch the

sound mode of an SA-

CD hybrid layer disc.

• Start Sound Mode is set to CD. • Change Start Sound Mode

setting to Super Audio CD.

Sound is too quiet when

signals are output from

a PC.

• The PC volume is turned down. • Turn the PC volume up. 18

Troubleshooting

Explanation of terms

1 2 ... 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

Marantz SA8004 Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for CD players Marantz SA8004