34
ENGLISH
USING THE SLEEP TIMER
NIGHTTONE
T.TONE SPK SETNTSC/PAL
1/ALL A-B RANDOM CLRPRG
ZOOMANGLEAUDIOS.TITLE
T.CLR RDS FM MODE MEMORY
TUNE PRESET BAND TUNE MODE
REPEAT
RC2500ER
ENTER
MENU
The power can be switched off after a specified
amount of time.
1. Press the SLEEP button on the remote control
unit repeatedly until desired time appears on
the display.
• The sleep time can be changed by 10
minutes step.
10 → 20 → 30 → 40 → 50 → 60 → 70 → 80
→ 90 → 100 → 110 → 120 → OFF (original
display) → 10 → …
• When you set the sleep timer, the dimmer
function is turned on automatically.
•
If you want to check the remaining time, press
the SLEEP button once. The remaining time
will be displayed for 4 seconds, and return to
the normal display.
•
The setting time passes, the power is turned
off.
ANALOG/DIGITAL (VCR / DSS mode only)
Selecting Analog audio input or Digital audio input.
If you have already connected both digital and
analog inputs to input source, you can select
temporarily the audio input mode for each input
source with A/D button.
NIGHTTONE
T.TONE SPK SETNTSC/PAL
1/ALL A-B RANDOM CLRPRG
ZOOMANGLEAUDIOS.TITLE
T.CLR RDS FM MODE MEMORY
TUNE PRESET BAND TUNE MODE
REPEAT
RC2500ER
ENTER
MENU
1.
When
A/D
button is pressed,
the input mode is
switched
between the analog and digital inputs.
•
In Digital mode, the digital
input jacks are
selected.
• In Analog mode, the analog input jacks are
selected.
LISTENING THROUGH HEADPHONES
This jack may be used to listen to the unit’s output
through a pair of headphones. Be certain that the
headphones have a standard 1/4" stereo phono
plug. (Note that the speakers will automatically be
turned off when the headphone jack is in use.)
FUNCTIONPSTOPPLAY/IIPAUSE
OPEN/CLOSE
POWER
ON/STANDBY
Notes:
• When using headphones, the surround mode
will change to STEREO mode compulsorily.
OTHER OPERATIONS
NIGHT MODE
The Night Mode is effective the Dolby Digital only
when the signal is entered through the DVD, VCR,
DSS digital input jack and it compresses the
dynamic range.
NIGHT
RETURN
DISPLAY
MUTE
VOLUME
DIMMERSURROUND
0
987
654
321
TV-CH
TV-VOL
TV-INPUTA/DDSSVCR
TV POWERTVTUNERDVD
SLEEPSTANDBY/ON
1.
Press NIGHT button on the remote
control unit
while in play or stop mode.
•
Each time NIGHT button is pressed, the
night mode is changed as follows :
NIGHT OFF
NIGHT STD
NIGHT MAX
OFF :
Audio with uncompressed dynamic range.
Select this when you don't want to use the
night mode.
STD :
Audio with partially compressed dynamic
range.
MAX :
Audio with fully compressed dynamic range.
USING THE DIMMER FUNCTION
NIGHTTONE
T.TONE SPK SETNTSC/PAL
1/ALL A-B RANDOM CLRPRG
ZOOMANGLEAUDIOS.TITLE
T.CLR RDS FM MODE MEMORY
TUNE PRESET BAND TUNE MODE
REPEAT
RC2500ER
ENTER
MENU
You can dim the front display.
1. Press the DIMMER button on the remote
control unit repeatedly to select "DIMM ON"
and "DIMM OFF".
•
When you select "DIMM ON", the display is
dimmed.
ER2500U DFU_01_eng3/4 04.8.26, 4:32 PMPage 34 Adobe PageMaker 6.5J/PPC
Downloaded from www.Manualslib.com manuals search engine
Downloaded From DvDPlayer-Manual.com Marantz Manuals
Comments to this Manuals