Marantz SR8200 User Manual download pdf (Page 33)

ENGLISH

SPEAKER DISTANCE (TIME ALIGNMENT)

Use this parameter to specify the distance of each speaker’s position

from the listening position. The delay time is automatically calculated

according to these distances.

Begin by determining the ideal or most commonly used seating

position in the room.

This is important for the timing of the acoustics to create the proper

sound space that the SR8200 and today’s sound systems are able to

produce.

Note that the speakers that you selected “No” or “None” for in the

Speaker Config sub-menu will not appear here.

(There are several usefull books and special DVD and LD’s available

to guide you through proper home theater configuration. If you are

unsure, have your Marantz dealer perform the installation for you.

They are trained professionals familiar with even the most

sophisticated custom installations. Marantz recommends the

WWW.CEDIA.ORG website for further information about this).

To select the each speaker , press Up or Down cursor button.

To set the distance for each speaker , press the Left or Right

cursor buttons.

If you finish these setup, move cursor to “NEXT” with Up or Down

cursor button and then press OK button to go to next page.

Front –L : Set the distance from the front left speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Front –R : Set the distance from the front right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Center : Set the distance from the center speaker to your normal

listening position between 1 and 30 feet in 1.0 foot

interval

(0.3 to 9 meters in 0.3-meter intervals).

Surr Left : Set the distance from the surround left speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Surr Right : Set the distance from the surround right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Subwoofer : Set the distance from the subwoofer to your normal

listening position between 1 and 30 feet in 1.0-foot

intervals

(0.3 to 9 meters in 0.3-meter intervals).

Surr BACK: Set the distance from a surround back speaker to your

normal listening position between 1 and 30 feet in 1.0-

foot intervals (0.3 to 9 meters in 0.3-meter intervals).

Surr B L : Set the distance from the surround back left speaker to

your normal listening position between 1 and 30 feet in

1.0-foot intervals (0.3 to 9 meters in 0.3-meter

intervals).

Surr B R : Set the distance from the surround back right speaker

to your normal listening position between 1 and 30 feet

in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter

intervals).

Notes

• Speakers that you selected "No" or "None" for in the Speaker

Size menu will not appear.

• The setting of Surr.Back L and Surr.Back R appears if set for

two surround back speakers in the Speaker Size menu.

• The setting of Surr.Back appears if set for one surround back

speaker in the Speaker Size menu.

2 - 2 SPEAKERS D I STANCE

FRONT L : 10 f t 3 . 0 m

FRONT R : 10 f t 3 . 0 m

CENTER : 10 f t 3 . 0 m

SURR . L : 1 0 f t 3 . 0 m

SURR . R : 1 0 f t 3 . 0 m

SUB W : 10 f t 3 . 0 m

SURR . BACK : 1 0 f t 3 . 0 m

MA I N RETURN NEXT EX I T

SPEAKERS LEVEL

Here you will set the volume for each speaker so that they are all

heard by the listener at the same level.

Note:

• The speaker level settings is not available in 7.1channel input

mode and S-Direct mode.

TEST MODE : Selects “MANUAL” or “AUTO” for generating mode of

test tone Left or Right cursor button.

If you select “AUTO” , the test tone will be cycled through in a circular

pattern which is Left →Center →Right →Surround Right →Surround

Back Right →Surround Back Left →Surround Left →Subwoofer

→Left →.. increments of 3 seconds for each channel.

Using the Left and Right cursor buttons, adjust the volume level of the

noise from the speaker so that it is the same level for all speaker.

If you select “MANUAL”, adjust the output level of each speaker as

follow.

When you move cursor to FRONT L by pressing Down cursor

button, the SR8200 will emit a pink noise from the front left

speaker.

At this time, the master volume automatically increases to the

reference level (0dB).

Remember the level of this noise and then press the Down cursor

button.

(Note that this can be adjusted to any level between -10 and +10

dB in 1db intervals.)

The SR8200 will now emit the pink noise from the center speaker.

Using the Left and Right cursor buttons, adjust the volume level

of the noise from the center speaker so that it is the same level as

the front left speaker.

Press the Down cursor button again. The SR8200 will now emit

the pink noise from the front right speaker.

Repeat steps 2 and 3 above for the front right and other speakers

until all speakers are adjusted to the same volume level.

If you finish these setup, press OK button, the cursor will move to

“NEXT” and then press OK button to go to next page.

Notes:

• Speakers that you selected “No” or “None” for in the Speaker

Size menu will not appear.

• The setting of Surr.Back L and Surr.Back R appears if set for

two surround back speakers in the Speaker Size menu.

• The setting of Surr.Back appears if set for one surround back

speaker in the Speaker Size menu.

• The setup level for each channel is memorized for reproduction

in all surround mode.

• To adjust the speaker levels for 7.1-channel input sources, you

will need to use the 7.1CH-INPUT sub menu. (See page 32).

• In order to correctly set the output levels, use a hand-held Sound

Pressure Level meter (SPL), set to C-Weighting and Slow

averaging. A Radio Shack

SPL meter (catalogue number 330

- 2055) works well. Using the internal channel noise

generators, set each channel so that you read 75 dB SPL from

each channel when seated at the listening position.

2 - 3 SPEAKERS LEVEL

T EST MODE : MANUAL

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR . R : 0 dB

SURR . BACK : 0 dB

SURR . L : 0 dB

SUB W : 0 dB

MA I N RETURN NEXT EX I T

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Comments to this Manuals

No comments

Marantz SR8200 User Manual Page 33

Comments to this Manuals

Related products and manuals for Receiver Marantz SR8200