Marantz M-CR511 User Manual download pdf (Page 97)

No sound comes out

Symptom Cause / Solution Page

No sound comes out of

speakers.

Check the connections for all devices. 18

Insert connection cables all the way in. －

Check that input connectors and output connectors are not reversely connected. －

Check cables for damage. －

Check that speaker cables are properly connected. Check that cable core wires come in contact with the

metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for

looseness.

Check that a proper input source is selected. 29

Adjust the volume. 30

Cancel the mute mode. 30

Check that the correct input source is selected when audio is being input to this unit from an external

device.

Check the digital audio output setting on the connected device. The initial settings may be off depending

on the device.

Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this

unit.

No sound is output from the speakers when headphones are connected. 11

Contents Connections Playback Settings Tips Appendix

Front/Top

panel

Rear panel

Remote control

unit

Index

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 132 133

No comments

Marantz M-CR511 User Manual Page 97