Marantz PM-11S1 User Manual download pdf (Page 16)

12

ENGLISH

ENGLISH

REAR PANEL

NAMES AND FUNCTIONS OF PARTS

A PHONO GND Terminal

Connect the grounding wire from an analog record player

here.

B PHONO Input Jacks

These jacks are for connecting to an analog record player.

Both MC and MM cartridges can be used, therefore set

the PHONO MC button on the front panel according to the

type of cartridge you are using.

In the bi-amp mode, the R channel jack cannot be used.

C BALANCED INPUT Jacks

These jacks are for connecting to the balanced output jacks

of a CD player or D/A converter. With the BALANCED IN-

PUT jacks of the PM-11S1, pin 1 is GND, pin 2 is Cold and

pin 3 is Hot.

In the bi-amp mode, the R channel jack cannot be used.

D CD Input Jacks

These jacks are for connecting to the output jacks of a

Super Audio CD player, CD player, etc.

In the bi-amp mode, the R channel jack cannot be used.

E LINE 1/2 Input Jacks

These jacks are for connecting to the output jacks of a

tuner, DVD player, etc.

In the bi-amp mode, the R channel jack cannot be used.

F RECORDER 1/2 IN Jacks

These jacks are for connecting to the output jacks of a CD-

R, MD deck, tape deck, etc.

In the bi-amp mode, the R channel jack cannot be used.

G RECORDER 1/2 OUT Jacks

These jacks are for connecting to the recording input jacks

of a CD-R, MD deck, tape deck, etc. Output signals can be

turned ON/OFF from the REC OUT button on the front

panel.

In the bi-amp mode, the signals input to the L channel are

output to both output jacks.

H PREOUT Jacks

These jacks are for connecting to the input jacks of an-

other main amplifier or active subwoofer. Output signals

can be turned ON/OFF from the PRE OUT button on the

front panel.

In the bi-amp mode, the signals input to the L channel are

output to both output jacks.

I SPEAKER SYSTEMS Output Terminals

You can connect 2 speaker systems to the PM-11S1.

Speaker output can be turned ON/OFF from the SPEAKER

A and B buttons on the front panel.

In the bi-amp mode, the signals input to the L channel are

output to both output terminals.

J F.C.B.S. IN/OUT Jacks

You can connect and synchronize up to four PM-11S1s in

a complete bi-amp connection or multi-channel connec-

tion. A stereo miniplug or monaural miniplug cable can be

used for the connections. For instructions on use and con-

nections, see “ABOUT FCBS” on pg. 17.

K Operating Mode Switch

This switch is for setting the operating mode of the PM-

11S1.

STEREO: Set to use the PM-11S1 as an ordinary 2-chan-

nel stereo amplifier.

BI-AMP: Set to use two PM-11S1s in a complete bi-amp

connection with FCBS. For more information on the bi-amp

mode, see “ABOUT THE BI-AMP MODE” on pg. 17.

L AC IN Socket

Connect one end of the included power cable here and

the other end to a power outlet. The PM-11S1 can be pow-

ered by 230V AC only.

AC IN

3

1

2

3

1

2

PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 12 Adobe PageMaker 6.5J/PPC

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Comments to this Manuals

No comments