Marantz SR4003 User Manual download pdf (Page 45)

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

OTHERS

CIRCLE SURROUND

(CS

-CINEMA, CS

-MUSIC, CS

-MONO)

Circle Surround is designed to enable multichannel

surround sound playback of non-encoded and

multichannel encoded material.

Backward compatibility provides listeners with up to

6.1 channels of surround performance from entire

collection of music and ﬁ lm, including broadcast,

videotape and stereo recorded music.

Depending on source material, you can select CS

Cinema mode, CS

-Music mode or CS

-Mono

mode.

CSII Cinema mode

This mode is suited for playing back Circle Surround-

encoded and non-encoded film and television

soundtracks. Cinema Mode enables 6.1-channel

surround playback of 2-channel sources such as

Video Cassettes, TV broadcasts, streaming media

and DVDs.

CSII Music mode

This mode is suited for playing back Circle Surround-

encoded and non-encoded music. Music Mode

decodes, music DVDs, radio and TV music broadcasts

and CDs into enveloping 6.1-channel surround.

CSII-Mono mode

This mode plays back monaural recordings from

any source, including CDs, DVDs and TV and radio

broadcasts in compelling 6.1-channel surround.

Notes:

• CS II mode is available for 2ch input signals which

are encoded in Dolby Digital or PCM format.

• PCM-audio signals can be subjected to CS II

processing when the sampling frequency is 32 kHz,

44.1 kHz or 48 kHz.

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right channels

play normally when PCM-audio or analog stereo is

input.

With Dolby Digital and DTS sources, the 5.1

multichannels are converted to two channel stereo.

96 kHz PCM source material can be played back in

stereo mode.

VIRTUAL

This mode creates a virtualized surround sound

experience from a two-speaker (front L and R)

playback system playing any multichannel audio

source (such as found on DVDs and digital

broadcasts), including Dolby Digital, Dolby Pro Logic

or DTS.

MULTI CH. ST

This mode is used to create a wider, deeper and more

natural soundstage from two channel source material.

This is done by feeding the left channel signal to

both left front and left surround speaker and the right

channel signal to both right front and right surround

speaker. Additionally, the center channel reproduces

a mix of the right and left channel.

CAUTION

NOTE for DTS signal

* Connected DVD player, laserdisc player or CD

player needs to support DTS digital output. You

may not be able to play some DTS source signals

from certain CD players and LD players even if

you connect the player to this unit digitally. This

is because the digital signal has been processed

(such as the output level, sampling frequency

or frequency response), and this unit cannot

recognize the signal as DTS data.

* You can not listen to DTS-encoded software in a

multiroom.

* Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

* While signals from a DTS laserdisc or CD are

playing in another surround mode, you cannot

switch to digital input or from digital input to analog

input from the INPUT SETUP in the MAIN MENU

or by pressing the A/D button.

* The outputs for VCR 1 OUT, DSS/VCR 2 OUT,

TAPE OUT, and CD-R OUT output analog audio

signals only. Do not record from CDs or LDs that

support DTS using these outputs. If you do, the

DTS-encoded signal will be recorded as noise.

NOTE for Dolby Digital Surround EX signal

* When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to set the

EX/ES mode.

* Note that some of Dolby Digital Surround

EX-encoded software does not contain the

identiﬁ cation signal. In this case, set the EX/ES

mode manually.

NOTE for 96 kHz/192 kHz PCM audio

* The AUTO, Pure Direct, and Stereo modes can be

used when playing PCM signals with a sampling

frequency of 96/192 kHz (such as from DVD-

Video/Audio discs).

* Certain DVD player models inhibit digital output.

For details, refer to the player’s operation manual.

* Some DVD discs feature copy protection. When

using such disc, 96 kHz PCM signal is not output

from the DVD player. For details, refer to the

player’s operation manual.

NOTE for HDCD signal

* HDCD is effective only through digital input.

* You may not be able to play some HDCD source

signals from certain CD players if you connect

the player to this unit digitally. This is because the

digital signal has been processed (such as the

output level, sampling frequency or frequency

response) and this unit cannot recognize the

signal as HDCD data.

DESCRIPTION

Manufactured under license under U.S. Patent

#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,226,616; 6,487,535; 7,003,467; 7,212,872 & other

U.S. and worldwide patents issued & pending. DTS,

DTS Digital Surround, ES, and Neo:6 are registered

trademarks and the DTS logos, Symbol and DTS

• dts Digital Surround

DTS was introduced in 1994 to provide 5.1 channels of

discrete digital audio into home theater systems.

DTS brings you premium quality discrete multichannel

digital sound to both movies and music.

DTS is a multichannel sound system designed to

create full range digital sound reproduction.

The no compromise DTS digital process sets the

standard of quality for cinema sound by delivering

an exact copy of the studio master recordings to

neighborhood and home theaters.

Now, every moviegoer can hear the sound exactly as

the moviemaker intended.

DTS can be enjoyed in the home for either movies or

music on of DVD’s, LD’s, and CD’s.

• dts Neo:6

The advantages of discrete multichannel systems

over matrix are well known.

But even in homes equipped for discrete multichannel,

there remains a need for high-quality matrix decoding.

This is because of the large library of matrix surround

motion pictures available on disc and on VHS tape; and

analog television broadcasts.

The typical matrix decoder of today derives a center

channel and a mono surround channel from two-

channel matrix stereo material. It is better than a

simple matrix in that it includes steering logic to

improve separation, but because of its mono, band-

limited surround it can be disappointing to users

accustomed to discrete multichannel.

Neo:6 offers several important improvements as

follow,

• Neo:6 provides up to six full-band channels of

matrix decoding from stereo matrix material. Users

with 6.1 and 5.1 systems will derive six and ﬁ ve

separate channels, respectively, corresponding to

the standard home-theater speaker layouts.

SR4003N DFU_01_E2_2.indd 41SR4003N DFU_01_E2_2.indd 41 08.6.20 5:09:35 PM08.6.20 5:09:35 PM

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments

Marantz SR4003 User Manual Page 45

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Marantz SR4003