Marantz SR6008 Owner's Manual download pdf (Page 149)

149

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Audio Delay

While viewing video, manually adjust the time to delay audio output so

that the video and audio are synchronized.

0ms (Default) – 200ms

•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync”

(vpage155) is set to “On” and when a TV compatible with Auto Lip Sync is

connected.

•Store “Audio Delay” for each input source.

•Audio Delay for game mode can be set when “Video Mode” (vpage157) is set

to “Auto” or “Game”.

Volume

Set the MAIN ZONE (room where the unit is located) volume setting.

2 Scale

Set how volume is displayed.

0 – 98 (Default) : Display in the range 0 (Min) to 98.

–79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0

dB.

•The “Scale” setting applies to all zones.

2 Limit

Make a setting for maximum volume.

60 (–20dB) / 70 (–10dB) / 80 (0dB)

O (Default)

2 Power On Level

Deﬁne the volume setting that is active when the power is turned on.

Last (Default) : Use the memorized setting from the last session.

Mute : Always use the muting on condition when power is turned on.

1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.

2 Mute Level

Set the amount of attenuation when muting is on.

Full (Default) : The sound is muted entirely.

–40dB : The sound is attenuated by 40 dB down.

–20dB : The sound is attenuated by 20 dB down.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 246 247

No comments

Marantz SR6008 Owner's Manual Page 149