Marantz CDR631 User's Guide download pdf (Page 23)

ENGLISH

MENU MODE

Text Memory Review/Erase Text Memory

The input text data of the disc is once saved in the text memory

until finalizing the disc. When the text memory is full,

will appear on the display and unable to add

more text data. If you want to add more text data, you have to

finalize the text data for each disc in order to obtain memory

space or erase the entire memory following the operation below.

Stay in the stop mode. (No Operation)

Press

STORE/MENU

(20, 77) on the deck or the remote

control to enter Menu mode.

Rotate

REC LEVEL/SELECT

(19)

or press

S (15, 74),

T (16, 82) to select the TEXT VIEW submenu.

appears on the display.

Press

PUSH ENTER

(19) or

ENTER

(78) to confirm.

Rotate

RECLEVEL/SELECT

(19) or press

S (15, 74),

T (16, 82) to select the disc you wish to erase.

Press

PUSH ENTER

(19) or

ENTER

(78) to confirm.

appears on the display.

Press the

PUSH ENTER

(19) or

ENTER

(78) to confirm

the erasure of the text for that particular disc.

Press

STORE/MENU

(20, 77) to return to the submenu

9 9

9 (13, 81) to exit.

Note:

- If there are no discs in the memory, the message

appears on the display.

- / may also appear when

unfinalizing a CD-RW disc for which text was stored (see

‘UNFINALIZING CD-RW discs’ page 12.). The same

action(s) should be taken in order to obtain memory space.

Recording submenus

• When Auto Track is ON, track numbers will automatically be

increase during the recording, also able to set Auto stop ON/

OFF.

• You can adjust the right and left volume balance during the

recording.

Auto track increment

Stay in the stop mode. (No Operation)

Press

STORE/MENU

(20, 77) on the deck or the remote

control to enter Menu mode.

The numbers between parentheses refer to the fold-out.

Rotate

REC LEVEL/SELECT

(19)

or press

S (15, 74),

T (16, 82) to select the AUTO TRACK submenu.

appears on the display.

Press

PUSH ENTER

(19) or

ENTER

(78) to confirm.

Select Auto track or by rotating

REC LEVEL/

SELECT

(19) or

press

S (15, 74),

T (16, 82).

Press

PUSH ENTER

(19) or

ENTER

(78) to confirm.

• When

is selected, track numbers will be automati-

cally incremented during recording.

•

When is selected, you can number the recorded tracks

yourself by press

TR.INCR.

(25) or

TRACK INCR

(67).

Press

STORE/MENU

(20, 77) to store settings and re-

turn to the submenu or

9 9

9 (13) to exit.

Source

No source

(no lock)

CD/MD

(with user data)

None

DAT/DCC

(with user data)

Unknow

(no user data)

Analog

Track increment based on user data of in

cominng siganl

Track increment based on user data of in

cominng siganl

Track increment after silence gap of 2.7

seconds on incominng siganl

Track increment after silence gap of 2.7

seconds on incominng siganl

AUTO TRACK

Note:

- Auto track is a function to switch increasing the track num-

bers either automatically or manually. When Auto track is

ON, there are two ways to activate the function.

- If a digital source has track information (Q-subcode) such as

CD or MD, the track transition is automatically increased ac-

cording to track information of the digital source.

- If an audio source is analog or digital without track informa-

tion, silence gap is detected. When length of silence gap is

more than 2.7 seconds, the auto track function is automati-

cally activated at the point of 2.7 seconds just before A (- 35

dB) is detected. (See following figure below.)

Track X+1

Audio source signal

A (-35 dB)

B (-55 dB)

Silence gap

2.7 sec

B is DETECTED A is DETECTED

Track X

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Marantz CDR631 User's Guide Page 23

Comments to this Manuals

Related products and manuals for CD players Marantz CDR631