Marantz SR5003 User Manual download pdf (Page 36)

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

SETUP

2-2 MANUAL SETUP

Select “2. SPKR SETUP” from the MAIN

MENU.

Select “MANUAL SETUP” with the 3

cursor buttons.

Press the ENTER button to enter the

selection.

SPEAKER SIZE

SUB W : YES

FRONT : SMALL

CENTER : SMALL

SURR. : SMALL

SURR.B : 2CH

SURR.B SIZE : SMALL

LPF/HPF : 80Hz

BASS MIX :

RETURN NEXT EXIT

When setting the speaker size in the SPEAKER SIZE

menu, use the guidelines below.

LARGE:

The complete frequency range for the channel you

are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting that

are lower than approx. 80 Hz will be output from

the subwoofer.

If the SUB. W is set to “NO” and the front speakers

are set to “LARGE,” then the sound will be output

from both the left and right speakers.

Select each speaker with the 3

4 cursor

buttons.

Set the size of each speaker with the 1

cursor buttons.

SUB W

YES:

Select when a subwoofer is connected.

NO:

Select when a subwoofer is not connected.

FRONT

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NO” is selected for the subwoofer setting, then

this setting is ﬁ xed at “LARGE”.

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURR.

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. B

NONE:

Select if no surround back left and right speakers

are connected.

1CH:

Select if one surround back speaker is connected.

In this case, the audio signal is emitted from the

SURR BACK LEFT SPEAKER terminal.

2CH:

Select if the surround back left and right speakers

are connected.

ZSP A:

Select if using the SURROUND BACK SPEAKER

terminal as ZONE SPEAKER A.

Notes:

• If “NONE” is selected for the SURR. setting, then

this setting is ﬁ xed to “NONE.”

SURR. B SIZE

LARGE:

Select if the surround back speakers are large.

SMALL:

Select if the surround back speakers are small.

Note:

• If “NONE” is selected for the SURR. setting, then

this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the cutoff

frequency for the small speakers used. Select one of

the crossover frequency levels according to the size

of the small speakers connected.

60Hz → 80Hz → 100Hz → 120Hz → 140Hz →

160Hz → 180Hz

Note:

• If using small front speakers, set a slightly higher

frequency. If using large front speakers, set a slightly

lower frequency.

BASS MIX

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for the

subwoofer during stereo playback.

This setting has effect only during playback of

PCM or analog stereo sources.

• When “BOTH” is selected, the low frequencies will

be played through the main L&R speakers and the

subwoofer.

In this playback mode, the low frequency range

expands more uniformly throughout the room, but

depending on the size and shape of the room,

interference may result in a decrease of the actual

volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play

through the main L&R only.

Note:

• LFE signals during playback of Dolby Digital or

DTS will be played through the subwoofer.

After you complete this portion of the setup,

move the cursor to “NEXT” with the 3, 4, 1 and

2 cursor buttons and press the ENTER button

to go to the next page.

SPEAKER DISTANCE

UNIT : ft

FRONT L : 10.0 ft

CENTER : 10.0 ft

FRONT R : 10.0 ft

SURR.R : 10.0 ft

SURR.B R : 10.0 ft

SURR.B L : 10.0 ft

SURR.L : 10.0 ft

SUB W : 10.0 ft

RETURN BACK NEXT EXIT

Use this menu to specify the distance of each

speaker’s position from the listening position. The

delay time is automatically calculated according to

these distances.

Begin by determining the ideal or most commonly

used seating position in the room.

This is important for the timing of the acoustics to

create the proper sound space that the unit and

today’s sound systems are able to produce.

Note:

• For speakers for which you have selected “NONE”,

the speaker conﬁ guration sub-menu will not appear

here.

Select either m (meters) or ft (feet) for UNIT

with the 1

2 cursor buttons.

Select each speaker with the 3

4 cursor

buttons.

Set the distance for each speaker , press the 1

2 cursor buttons.

FRONT L:

Set the distance from the front left speaker to your

normal listening position.

CENTER:

Set the distance from the center speaker to your

normal listening position.

FRONT R:

Set the distance from the front right speaker to

your normal listening position.

SURR. L:

Set the distance from the surround left speaker to

your normal listening position.

SURR. R:

Set the distance from the surround right speaker to

your normal listening position.

SR5003_U_1_ENG 2_3.indd 33SR5003_U_1_ENG 2_3.indd 33 08.7.4 7:52:14 PM08.7.4 7:52:14 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 80 81

Comments to this Manuals

No comments

Marantz SR5003 User Manual Page 36

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Marantz SR5003