Marantz SR5400U User Manual download pdf (Page 20)

ENGLISH

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT)

Four digital inputs can be assigned to a desired

source.

Use this menu to select the digital input jack to be

assigned to the input source.

Select “INPUT SETUP” in SETUP MAIN MENU

with or cursor button, and press the OK

button.

To select the input source, press or cursor

buttons.

To select the digital input jack , press the or

cursor buttons.

Select “Dx-AT” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “Dig x”, when only a digital signal will be

used.

Select “ANA” for input sources for which no

digital input jacks are used.

After you complete this portion of the set up,

move the cursor to MAIN with or cursor

buttons and press the OK button.

Notes:

• The TUNER and AUX are fixed to the analog

input, and cannot be selected for any digital input.

• When a DTS-LD or DTS-CD is playing, this setup

is not available. This is to avoid noise being

generated from the analog input.

• If “Dx-AT” is selected and a DVD, compact disc

or LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such

cases, change the setting to DIGITAL.

2 SPEAKER SETUP

After you have installed the SR5400, connected all

the components, and determined the speaker

layout, it is now time to perform the settings in the

Speaker Setup menu for the optimum sound

acoustics for your environment and speaker layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

2-1 SPEAKERS SIZE

When setting the speaker size in the SPEAKER

SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel

you are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting

lower than approx. 100 Hz will be output from

the subwoofer.

If the Subwoofer is set to “NONE” and the front

speakers are set to “Large,” then the sound will

be output from both the left and right speakers.

Select “SPEAKER SETUP” in MAIN SETUP

MENU with the or cursor buttons, and press

the OK button.

To select the each speaker , press the or

cursor buttons.

To select the setting of each speaker size,

press the or cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the or

cursor buttons and then press the OK button

to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

1INPUTSETUP

CD : D3 - AT TV : ANA

T APE : ANA DVD : D4 - AT

CD-R :D1-AT VCR1 :ANA

DSS : D2 - AT

MA I N E X I T

2-1 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L /R : LARGE

CENTER : SMALL

SURROUND L / R : SMALL

SURR . BACK : SMALL

LPF /HPF : 100 HZ

BASS M I X : BOTH

MA I N NE X T E X I T

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is fixed to “Large.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

LARGE:

Select if the surround back speaker is large.

SMALL:

Select if the surround back speaker is small.

NONE:

Select if no surround back speaker is connected.

• If “None” is selected for the Surround L/R setting,

then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the

cutoff frequency for the small speakers used. Select

one of the crossover frequency levels according to

the size of the small speaker connected.

80Hz :

Select this when the bass speaker is about 12

cm (4 3/4 inches).

100Hz :

Select this when the bass speaker is about 10

cm (3 15/16 inches).

120Hz :

Select this when the bass speaker is about 8 cm

(3 3/16 inches).

Notes:

•

Use the above comments as reference when adjusting.

• If S- Direct mode , 6.1CH Input is in use, this

function does not take effect.

BASS MIX

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for

the subwoofer during stereo playback .

• When “BOTH” is selected, the low frequencies

will be played through the main L&R, as well as

the sub woofer.

In this playback mode, the low frequency range

expand more uniformly through the room, but

depending on the size and shape of the room,

interference may result in a decrease of the

actual volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play

through the main L&R ONLY.

Note:

LFE signals during playback of Dolby Digital or

DTS, will be played through the sub woofer.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Marantz SR5400U User Manual Page 20

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR5400U