Marantz SR5400U User Manual download pdf (Page 9)

ENGLISH

MONITOR OUT

This is a monitor output and each one includes

both composite video and S-video configurations.

When connecting two video monitors or

televisions, be aware that the OSD interface can

be used with both MONITOR OUT connections.

AC IN

Connect to an AC power outlet.

SR5400 has to be powered by 120 V AC only.

AC OUTLETS

Connect the AC power cables of components such as

a DVD and CD player to these outlets. SWITCHED

and UNSWITCHED outlets are provided.

The one marked SWITCHED provides power only

when the SR5400 is turned on and is useful for

components which you use every time you play

your system.

The one marked UNSWITCHED is always live as

long as the SR5400 is plugged into a live outlet.

A component connected here may be left on

permanently, or may be switched off with via its own

power switch.

Caution:

•

In order to avoid potential turn-off thumps, anything

plugged into these outlets should be powered up

before the SR5400 is turned on.

•

The capacity of this AC outlet is 120W. Do not

connect devices that consume electricity more than

the capacity of these AC outlets. If the total power

consumption of the connected devices exceeds the

capacity, the protection circuit shuts down the

power supply.

Speaker outputs terminals

Six terminals are provided for the front left, front

right, front center, surround left, surround right and

surround back speakers.

Subwoofer Output

Connect this jack to the line level input of a

powered subwoofer. If an external subwoofer

amplifier is used, connect this jack to the

subwoofer amplifier input. If you are using two

subwoofers, either powered or with a 2 channel

subwoofer amplifier, connect a “Y” connector to

the subwoofer output jack and run one cable from

it to each subwoofer amplifier.

⁄0

6.1 CHANNEL INPUT

By connecting a DVD Audio player, SACD

multichannel player, or other components that has

a multichannel port, you can playback the audio

with 5.1 channel or 6.1 channel outputs.

⁄1

REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

⁄2

AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs.

There are 7 audio inputs (4 of which are linked to

video inputs) and 4 audio outputs (2 of which are

linked to video outputs). The audio jacks are

nominally labeled for cassette tape decks,

compact disc players, DVD players and etc.... The

audio inputs and outputs require RCA-type

connectors.

⁄3

DIGITAL INPUT (Dig.1 - 4) / OUTPUT

(coaxial, optical)

These are the digital audio inputs and outputs.

There are 2 digital inputs with coaxial jacks, 2 with

optical jacks.

The inputs accept digital audio signals from a

compact disc, LD, DVD, or other digital source

component.

For digital output, there is 1 coaxial output and 1

optical output.

The digital outputs can be connected to MD

recorders, CD recorders, DAT decks, or other

similar components.

REAR PANEL

COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component

video connectors, be sure to connect them to

these component video connectors on the

SR5400. The SR5400 has two component video

input connectors to obtain the color information (Y,

, C

) directly from the recorded DVD signal or

other video component and one component video

output connector to output it directly into the matrix

decoder of the display device.

By sending the pure DVD component video signal

directly, the DVD signal forgoes the extra

processing that normally would degrade the image.

The result is vastly increased image quality, with

incredibly life like colors and crisp detail.

Notes:

• This component video output will not display the

OSD menu system.

Preamp Outputs (L, R, SL, SR, SB, C)

Jacks for L(front left), R (front right), C (Center), SL

(surround left), SR (surround right) and SB (surround

back).

Use these jacks for connection to external power

amplifiers.

VIDEO IN/OUT (TV, DVD, VCR1, DSS/

VCR2)

These are the video inputs and outputs. There are

4 video inputs and 2 video outputs and each one

includes both composite video and S-video

configurations. Connect VCRs, DVD players, and

other video components to the video inputs.

S-video sources can be viewed through the S-

video outputs, and composite sources can only be

viewed through the composite output.

The 2 video output channels can be used to be

connected to video tape recorders for making

recordings.

FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial

cable, or a cable network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the

terminals marked “AM” and “GND”. The supplied

AM loop antenna will provide good AM reception in

most areas. Position the loop antenna until you

hear the best reception.

AUDIO

COMPONENT VIDEO

DIGITAL OUT

DIGITAL IN

OPT. COAX.

ANTENNA

SURROUND

BACK

FRONT CENTER SURROUND

LRLR

4312

6.1CH

IN OUT

TAPE CDR/MD

OUT SWOUTIN

CD C

SLL

INOUTIN

TV DVD DSS/VCR2

RSR

VCR1

OUT

RC-5

PRE

OUT

SR SWR

LSLC

DVDTV MONI.

VIDEO

VCR1

OUTOUTIN

DSS/VCR2

OUTIN

VCR1 DSS/VCR2

DVD IN OUT

S-VIDEO

MONI.OUTTV OUTIN

DVD

MONI.OUTDSS/VCR2

(

Ω

)

GND AM

MINIMUM 6 OHMS

SPEAKER SYSTEMS

AC IN

SERIAL NO.

AC OUTLETS

120V 60H

SWITCHED

1A 120W MAX

UNSWITCHED

1A 120W MAX

bnzx c m

⁄0

⁄3 ⁄2

,⁄1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments

Marantz SR5400U User Manual Page 9

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR5400U