Marantz SR5600 User's Guide Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 41
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
ENGLISH
19
SUB W:
Set the distance from the subwoofer to your
normal listening position.
SURR. B L:
Set the distance from the surround back left
speaker to your normal listening position.
SURR. B R:
Set the distance from the surround back right
speaker to your normal listening position.
Notes:
Set the distance to each speaker in meters (m) or
feet (ft) as follows.
m: 0.3 - 9 m in 0.3 m steps
ft: 1 - 30 ft in 1 ft steps
For the speakers that you have selected NONE
the Speaker Size menu will not appear.
The setting for Surr.Back L and Surr.Back R
appears if you set for it to, two surround back
speakers in the Speaker Size menu.
The setting of Surr.Back appears if it is set for one
surround back speaker in the Speaker Size menu.
2-3 SPEAKERS LEVEL SETTING WITH TEST TONE
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level. We recommend using a SPL (Sound
Pressure Level) meter, when available.
Note:
The speaker level settings are not available in 7.1
Channel Input mode, CS mode and Multi Channel
Stereo mode.
TEST MODE :
Selects MANUAL or AUTO for generating
the mode of the test tone with the or cursor
buttons.
If you select AUTO , the test tone will be cycled
through in a circular pattern which is Left Center
Right Surround Right Surround Back Right
Surround Back Left Surround Left
Subwoofer Left .. increments of 2 seconds
for each channel.
Using the
or cursor buttons, adjust the volume
level of the noise from the speaker so that it is the
same level for all the speakers.
If you select MANUAL, adjust the output level of
each speaker as listed below.
1.
When you move the cursor to FRONT L by
pressing the cursor button, the SR5600 will
emit a pink noise from the front left speaker.
Remember the level of this noise and then
press the
cursor button.
(Note that this can be adjusted to any level
between -10 and +10 dB in 1 dB intervals
except the subwoofer setting. The subwoofer
can be adjusted to any level between -15 and
+10 dB in 1 dB intervals.)
The SR5600 will now emit the pink noise from
the center speaker.
2.
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker.
3.
Press the cursor button again. The SR5600
will now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
After you complete this portion of the set up, press
the ENTER button, the cursor will move to MAIN
and then press the ENTER button to go to SETUP
MAIN MENU.
Notes:
Speakers that you selected NONE for in the
Speaker Size menu will not appear.
The setting of Surr.Back L and Surr.Back R
appears if you have set it for two surround back
speakers in the Speaker Size menu.
The setting of Surr.Back appears if you have set it for
one surround back speaker in the Speaker Size menu.
To adjust the speaker levels for 7.1-channel input
sources, you will need to use the 7.1CH-INPUT
sub menu. (See page 21).
2-2 SPEAKERS DISTANCE
Use this parameter to specify the distance of each
speakers position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR5600
and todays sound systems are able to produce.
Note:
For speakers that you have selected NONE the
Speaker Configuration sub-menu will not appear
here. (There are several useful books and special
DVD and LDs available to guide you through
proper home theater configuration. If you are
unsure, have your Marantz dealer perform the
installation for you. They are trained
professionals familiar with even the most
sophisticated custom installations. Marantz
recommends the WWW.CEDIA.ORG website for
further information about this).
1.
To select each speaker , press the or
cursor buttons.
2.
To set the distance for each speaker , press
the
or cursor buttons.
3.
After you complete this portion of the set up,
move the cursor to NEXT with the
or
cursor buttons and then press the ENTER
button to go to the next page.
FRONT L:
Set the distance from the front left speaker to
your normal listening position.
Center:
Set the distance from the center speaker to your
normal listening position.
FRONT R:
Set the distance from the front right speaker to
your normal listening position.
SURR. L:
Set the distance from the surround left speaker
to your normal listening position.
SURR. R:
Set the distance from the surround right speaker
to your normal listening position.
3 PREFERENCE
1.
Select PREFERENCE in the SETUP MAIN
MENU with the or cursor buttons, and
press the ENTER button.
2.
To select a desired content, press the or
cursor buttons.
STANDBY MODE:
When this function is set to ECONOMY, you
can reduce the power consumption when the
unit is in the standby mode.
Note:
TV-AUTO and RS-232C are disabled in the
ECONOMY setting.
TV AUTO:
Select the TV AUTO ON/OFF function to enable
or disable with the or cursor buttons. (refer
to page 27)
OSD Info:
Select the OSD information function to enable or
disable with the or cursor buttons.
If you select ENABLE, the SR5600 will display
the status of the feature (Volume up/down, input
select, etc..) on the TV monitor. But if you do not
desire this information, select DISABLE .
VIDEO CONVERT:
Select the VIDEO CONVERT function to enable
or disable with the or cursor buttons. (Video
cable connection: Refer to page 23)
After you complete this portion of the set up, move
the cursor to MAIN with the or cursor buttons
and press the
ENTER
button.
2 - 2 SPEAKERS D I STANCE
FRONT L : 10 f t 3 . 0 m
FRONT R : 10 f t 3 . 0 m
CENTER : 10 f t 3 . 0 m
SURR . L : 10 f t 3 . 0 m
SURR . R : 10 f t 3 . 0 m
SUB W : 10 f t 3 . 0 m
SURR . B L : 10 f t 3 . 0 m
SURR . B R : 10 f t 3 . 0 m
MA I N RETURN NEXT EX I T
2-3 SPEAKERS LEVEL
T EST MODE : MANUAL
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR . R : 0 dB
SURR . B R : 0 dB
SURR . B L : 0 dB
SURR . L : 0 dB
SUB W : 0 dB
MA I N R E T URN E X I T
3 PREFERENCE
S TANDBY MODE : ECONOMY
TV-AUTO :
✽✽✽
OSD I NFO : ENABLE
VIDEO CONVERT : ENABLE
MA I N E X I T
SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 19 Adobe PageMaker 6.5J/PPC
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Comments to this Manuals

No comments