Marantz SR5600 User's Guide download pdf (Page 27)

ENGLISH

SURROUND MODE

The SR5600 is equipped with many surround

modes. These are provided to reproduce a variety

of surround sound effects, according to the content

of the source to be played.

The available surround modes may be restricted

depending on the input signal and speaker setup.

AUTO

When this mode is selected, the receiver

determines whether the digital input signal is Dolby

Digital, Dolby Digital Surround EX, DTS, DTS-ES,

DTS 96/24 or PCM-audio.

Surround EX & DTS-ES will operate for multichannel

source that has a Dolby Digital Surround EX or DTS-

ES auto trigger flag in the digital signal.

When a Dolby Digital or DTS signal is input, the

number of channels for which the corresponding

signal is encoded will be played.

Inputting a Dolby Digital two channel signal with

Dolby surround status automatically subjects that

signal to Pro Logic IIx movie processing before

play.

PCM 96 kHz source material can be played in this

mode.

Notes:

• When you use this mode with certain DVD and

CD players, performing operations such as “Skip”

or “Stop” may momentarily interrupt the output.

• When the signal is not decoded, the mode is

changed to AUTO mode automatically. Refer to

page 23 to confirm the available decoding mode.

MODE

(Dolby Digital, Pro Logic

x MOVIE, Pro Logic

x MUSIC, Pro Logic

x GAME, Pro Logic)

This mode is used with source materials encoded

in Dolby Digital and Dolby Surround.

DOLBY DIGITAL

This mode is enabled when playing source

materials encoded in Dolby Digital.

Playing multichannel encoded 6.1 or 7.1-channel

Dolby Digital sources provides five main audio

channels (left, center, right, surround left and

surround right) and Low Frequency Effect channel.

Dolby Digital EX decoding is not available in this

mode.

Dolby Pro Logic IIx brings the excitement of

surround sound to any stereo mix, while making

existing Dolby Surround mixes sound more like

discrete 7.1 channels Surround sound.

Dolby Pro Logic IIx has 3 modes. Please see

below.

Pro Logic II x MOVIE

This mode provides 6.1 or 7.1 channel surround

sound from Dolby Surround encoded stereo movie

sound tracks.

Pro Logic II x MUSIC

This mode provides 6.1 or 7.1 channel surround

sound from conventional stereo sources, analog or

digital, such as CD, Tape, FM, TV, Stereo VCR, etc.

Pro Logic II x GAME

Game mode restores the impact low-frequency

surround effects by routing them to the system’s

subwoofer.

Pro Logic

This mode emulated original Dolby Pro Logic

decoding (3/1 surround) suit for Dolby Surround

encoded stereo movie soundtracks.

Notes:

• Pro Logic IIx mode will decode as Pro Logic II

mode when the SURROUND BACK SPEAKER

is set NONE in SPEAKER SETUP menu. (See

SPEAKER SETUP, page 18)

• Pro Logic IIx mode is available for a 2ch input

signal which is encoded in Dolby Digital or PCM

format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

TEMPORARILY TURNING OFF

THE SOUND

To temporarily silence all speaker outputs such as

when interrupted by a phone call, press the MUTE

button on the front panel or MUTE button on the

remote.

This will interrupt the output to all speakers and the

head-phone jack, but it will not affect any recording

or dubbing that may be in progress.

When the system is muted, the display will show

“MUTE” .

Press the MUTE button again to return to normal

operation.

USING THE SLEEP TIMER

To program the SR5600 for automatic standby,

press the SLEEP button on the remote.

Each press of the button will increase the time

before shut down in the following sequence.

The sleep time will be shown for a few seconds in

the display on the front panel, and it will count

down until the time has elapsed.

When the programmed sleep time has elapsed,

the unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and

the SLEEP indicator will disappear.

NIGHT MODE

Press the NIGHT button on the remote to turn on

the NIGHT mode.

Selecting the Night Mode ON is effective in Dolby

Digital only, and it compresses the dynamic range.

This softens loud passages such as sudden

explosions, to help prevent disturbing others late

at night.

To turn off the Night mode, press the NIGHT

button again.

OSD

VOL.

MAIN

SLEEP

MUTE

AMP

TUNER

TAPE

CDR/MD

DVD

VCR1

DSS/VCR2

ENTER

AUX1

TUNE/SEARCH

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN/V-OFF

7.1CH IN

STEREO

MCH-ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES VIRTUAL

DTS

PURE DIRECT

AUTO

321

654

T.TONE

MENU OFF

SET UP/

OSD

ENTER

OFF 10 20 30 40

90 80 70 60 50

OSD

VOL.

MAIN

SLEEP

MUTE

AMP

TUNER

TAPE

CDR/MD

DVD

VCR1

DSS/VCR2

ENTER

AUX1

DOWN

VOLUME

MUTE

7.1CH INPUT

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

ANALOG

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

AUX 1 INPUT

AUDIOS-VIDEO VIDEO L R

SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 24 Adobe PageMaker 6.5J/PPC

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Comments to this Manuals

No comments

Marantz SR5600 User's Guide Page 27

Comments to this Manuals

Related products and manuals for DVD players Marantz SR5600