Marantz NR1506 User Manual download pdf (Page 170)

Crossovers

Set in accordance with the lower limit frequency of the base frequencies

that can be played back through each speaker. See the speaker manual

for information concerning speaker crossover frequency.

Speaker Select

Selects how to set the crossover frequency.

All

(Default):

Sets the same crossover frequency for all

speakers.

Individual:

Selects the crossover points for each

speaker individually.

Set the crossover frequency

40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /

200 Hz / 250 Hz (Default : 80 Hz)

“Crossovers” can be set when the “Subwoofer Mode” setting is “LFE+Main”, or

when you have a speaker that is set to “Small”. (v p. 171)

The default crossover frequency is “80 Hz”, which will work best with the

widest variety of speakers. We recommend setting to a higher frequency that

the crossover frequency when small speakers are used. For example, set to

“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.

Sound below the crossover frequency is cut off from the output of the

speakers set in “Small”. This cut off bass frequency is output from the

subwoofer or front speakers.

The speakers that can be set when “Individual” is selected differ depending on

to the “Subwoofer Mode” setting. (v

p. 171)

When “LFE” is selected, speakers set to “Small” at “Speaker Config.” can be

set. If the speakers are set to “Large”, “Full Band” is displayed and the

setting cannot be made. (v

p. 166)

When “LFE+Main” is selected, speakers can be set regardless of the

“Speaker Config.” setting. (v p. 166)

Contents

Connections Playback Settings Tips Appendix

170

Front panel Display Rear panel Remote Index

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 248 249

No comments

Marantz NR1506 User Manual Page 170