Marantz SR8001 User Manual download pdf (Page 12)

ENGLISH

REMOTE CONTROLLER

RC8001SR

NAMES AND FUNCTIONS

z Infrared Transmitter and Learning

Sensor

This transmitter emits infrared light. Press the

buttons while pointing the transmitter towards the

infrared receiver window of the SR7001 or other

AV equipment. Be sure to also point towards other

remote controls when using the learning function.

x POWER ON and OFF buttons

(When AMP mode is selected)

These buttons are used to turn the SR7001 on or

off.

c SOURCE ON/OFF button

This button is used to turn a speciﬁ c source (such as

a DVD player) on or off independently from the rest

of the system.

v M (Mode) button

This button is used to program Macros. Pressing this

button switches between Normal mode and Macro

mode.

The > button is used to move to the next page. Up to

20 programs (4 pages) can be made. Holding down

the M button for three seconds or more switches to

the Setup mode, where the Setup menu is shown on

the LCD. The Setup menu has four pages, and the >

button is used to move to the next page. Pressing the

> button from page 4 returns you to page 1.

b D1 to D5 (Direct) buttons

Five types of direct operations can be performed

for each of the 12 source buttons such as the DVD,

television, ampliﬁ er, and other AV equipment. The

pages can be switched, so 4 pages × 5 types = 20

operations can be performed for a single source. The

text display can also be changed.

n > (Page) button

This button is used to switch pages for the Direct

button. The current page is shown on the LCD.

m VOL (Volume) button

This button is used to adjust the volume for the

ampliﬁ er and television.

Note:

• Set the AMP mode to use this button with the

SR7001.

2 31

5 64

MEMO

CLEAR

DSS

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

VCRDVD

SOURCE

OFF

ON/OFF

POWER

VOL

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP·SYNC

THX

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

SLEEP

LIGHT

Learning Remote Controller

RC8001SR

⁄1

⁄2⁄6

⁄7

⁄8

⁄9

¤0

¤1

⁄3

⁄4

⁄5

⁄0

@0 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

@1 AUDIO IN/OUT (TV, DVD, VCR1,

DSS/VCR2, TAPE, CD/CDR)

These are the analog audio inputs and outputs. There

are 6 audio inputs (4 of which are linked to video

inputs) and 4 audio outputs (2 of which are linked to

video outputs). The audio jacks are nominally labeled

for cassette tape decks, compact disc players, DVD

players and etc.... The audio inputs and outputs

require RCA-type connectors.

@2 DIGITAL INPUT (Dig.1 - 6) /

OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. There

are 3 digital inputs with coaxial jacks, 3 with optical

jacks.

The inputs accept digital audio signals from a

compact disc, LD, DVD, or other digital source

component.

For digital output, there is 1 coaxial output and 1

optical output.

The digital outputs can be connected to MD

recorders, CD recorders, DAT decks, or other similar

components.

VIDEO IN/OUT

(TV, DVD, VCR1, DSS/VCR2)

These are the video inputs and outputs. There

are 4 video inputs and 2 video outputs and each

one includes both composite video and S-video

conﬁ gurations. Connect VCRs, DVD players, and

other video components to the video inputs.

The 2 video output channels can be used to be

connected to video tape recorders for making

recordings.

@4 HDMI INPUT / OUTPUT

This unit has 4 HDMI inputs and 1 HDMI output. The

input function can be selected from the OSD menu

system. (See page 15) (The SR8001 has 2 HDMI

outputs.)

, MUTE button

This button is used to mute the audio for the SR7001

and television.

Note:

• Set the AMP mode to use this button with the

SR7001.

. GUIDE button

This button is used to display the menus for the DVD

player, DSS (satellite broadcasting tuner), or other

AV equipment.

(when AMP mode is selected)

This button is used to select the LIP.SYNC mode.

⁄0 EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup

menu.

⁄1 Numeric buttons

These buttons are used to switch between 0 to 9

of the source components. If the source is set to

the amplifier, these buttons are used to perform

operations.

(when AMP mode is selected)

(1) TEST button

Used to enter the test tone menu.

(2) CH SEL. (channel select) button

Used to call up SETUP MAIN MENU and adjust

speaker levels or 7.1 ch input level.

(3) SURR (surround) button

Used to select the surround mode.

(4) 7.1CH button

Press this button to select the output of an external multi

channel decoder.

(5) ATT button

When the input signal is too high and the voice

distorts even by throttling the SR7001 VOLUME

control, turn on this function. “ATT” is indicated when

this function is activated.

The input level is reduced. Attenuator is invalid for

use with the output signal of “REC OUT”.

Note:

• This function is unavailable during the digital input

is selected.

(6) SPK-AB button

Speaker mode is switched in the following

sequence.

A → B → A+B → off

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 78 79

Comments to this Manuals

No comments

Marantz SR8001 User Manual Page 12

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Marantz SR8001