Marantz SR8001 User Manual download pdf (Page 31)

ENGLISH

Note:

• The detection check measures the state of use of all

speakers whether actually used or not.

For example, if the center speaker is not used, the

test tone will require time to go from the L-channel

to the R-channel, therefore be careful not to unplug

the microphone or operate the SR7001 during this

time.

When the detection check ends, the following

OSD appears on the display.

AUTO SETUP

SPEAKERS CHECK:OK

1ST MIC POSITION!!

START

CHECK

EXIT

Here, to view the results of the detection check,

select “CHECK” with the 3/4 cursor buttons

and press the OK/ENTER button. The results

will be displayed.

SPEAKER CONFIG

CHECK !! SPEAKER

FRONT : YES

CENTER : NON

FRONT R : YES

SURR.R : YES

SURR.B R : NON

SURR.B L : NON

SURR.L : YES

SUB W : YES

RETURN EXIT

If the check results indicate an error, take suitable

action with that item and remeasure. (For error

messages, see “ERROR MESSAGES” on

page 30.)

After confirming the check results, select

“RETURN” with the 3/4 cursor buttons and

press the OK/ENTER button to return to the

OSD menu.

At this point, you can select “EXIT” to end Auto

Setup and return to “2. SPKR SETUP”.

2-1 AUTO SETUP (MultEQ™ SETUP)

The AUTO SETUP (MultEQ™ Setup) feature of

the SR7001 measures sound characteristics of the

speaker system and room where the receiver is used

and automatically optimizes settings.

The Audyssey MultEQ™ technology adopted by the

SR7001 provides the best listening environment for

multiple listeners.

To do this, the AUTO SETUP feature measures a

test tone emitted by each channel in a maximum of 6

listening positions, using the supplied microphone.

The measurement results are analyzed using an

original algorithm and environmental settings are

made to improve the sound characteristics of the

listening area.

To set up the speaker system (i.e., adjusting speaker

distance, etc.) without using the AUTO SETUP feature,

see “MANUAL SETUP” on page 31 of the manual.

HOW TO PERFORM AUTO SETUP

During measurement, the OSD menu displays the

condition, therefore turn power to the monitor on.

Connect the supplied microphone to the MIC

jack on the SR7001.

AV SURROUND RECEIVER SR7500

POWER ON/STANDBY PHONES

STANDBY

SL S SR

LFE

DIGITAL

SURROUND

DISP MULTI AUTO TUNED ST SPKR A B V-O FF

NIGHT

PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR DIRECT

AUTO

DISC 6.1 MT X 6.1

PCM

AAC

AUX 1 INPUT

AUDIOS-VIDEODIGITAL VIDEO L R

DOWN

VOLUME

ENTER

INPUT SELECTOR

Set the microphone in the listening position.

Notes:

• Measurement can be done in a maximum of 6

listening positions.

For the ﬁ rst measurement, set the microphone in the

main listening position.

• Use a stand or tripod to position the microphone at

ear height in the listening position.

• Remove any obstructions between the speakers and

microphone.

• To use the internal subwoofer of the amp, set the

volume to the middle point and set the crossover

frequency to the highest.

• During measurement, step away from the microphone

and operate the SR7001 via the remote control unit

from a position that is out of the path of the speaker

sound.

• The test tone output from the speakers during

measurement is loud. Be mindful of neighbors and

watch out for small children.

Either press the MultEQ™ button on the

front panel of the SR7001 or select “2. SPKR

SETUP” from the MAIN MENU, select “AUTO

SETUP” with the 3/4 cursor buttons, and

press the OK/ENTER button to display the start

screen.

Select the number of channels for the surround

back speaker you are using.

For a 5.1 channel speaker system, select

“NON” (Surround Back speaker off). (To use

speaker C or multi speaker, select “NON”. See

page 20, 37.)

Select “START” with the 3/4 cursor buttons

and press the OK/ENTER button to start

measurement.

AUTO SETUP

AUTO SETUP: START

MAIN ROOM

SURR BACK: 2CH

RETURN EXIT

Detection Check

During the detection check, the following

OSD appears on the display and checks are

made to detect dark sound in the listening

room, whether there are speakers or not and

polarity.

AUTO SETUP

SPEAKERS CHECK:--

NOW ANALYZING !!

CANCEL

EXIT

Calibration Check

AUTO SETUP

SPEAKERS CHECK:OK

1ST MIC POSITION!!

START

CHECK

EXIT

Select “START” with the 3/4 cursor buttons

and press the OK/ENTER button to measure

the ﬁ rst point (main listening position).

During measurement, the following OSD

appears on the display. At this point, you can

cancel measurement by selecting “CANCEL”

with the 3/4 cursor buttons and pressing the

OK/ENTER button.

AUTO SETUP

NOW ANALYZING!!

CANCEL

EXIT

When this measurement ends, the following

OSD appears on the display

AUTO SETUP

SPEAKERS CHECK:OK

2ND MIC POSITION!!

START

CALCULATE

EXIT

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 78 79

Comments to this Manuals

No comments

Marantz SR8001 User Manual Page 31

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Marantz SR8001