Marantz RC1200 User Manual download pdf (Page 23)

22

ENGLISH

• If, while programming, no buttons are

pressed for approximately 1 minute,

the remote controller will automatically

return to normal mode, and no macro

will be programmed in the memory.

4. When you are finished programming

macros, use a ballpoint pen or other

sharp point to press the MACRO button

x. LCD A will display END, and the

display will return to normal.

• Macros cannot be programmed for the

MODE z, MACRO x, < • 3 ⁄1, VOL

/ ., MEMO ⁄6 or CLEAR ⁄5 buttons.

Although function operations in the

Macro Mode can be programmed

more than once, only the first function

memorized in the ten function buttons

including LD, CD, TV--but not the AMP

button--will be sent from the remote

controller (the amplifier or receiver

function will change). For this reason,

it is not possible to select multiple

amplifier functions in a macro button.

(If the AMP button is programmed, the

same operations as those in the other

function buttons will be performed.)

Therefore, when executing operations

in the Macro Mode, what happens is

that, starting with the second function

operation, only the function mode of

the remote controller is changed, and

no signals are sent.

EDITING MACROS

Macros may be edited using following

procedure.

1. Use a ballpoint pen or other sharp point to

press the MACRO button x until the

MACRO and LEARN indicators are

displayed blinking on the LCD.

2. Press the Function button , to be

changed. Let’s use the example of the

laser disc player, by pressing the LD

Function button ,.

• LD-M is displayed blinking on LCD A.

• The number of steps in the completed

macro is highlighted on LCD C. In this

example there are 3 macro programs

in memory.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Comments to this Manuals

No comments