Marantz SR7500 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
ENGLISH
20
BASS MIX
The bass mix setting is only valid when
LARGE is set for the front speakers and YES
is set for the subwoofer during stereo playback .
This setting has effect only during playback of
PCM or analog stereo sources.
When BOTH is selected, the low frequencies
will be played through the main L&R, as well as
the subwoofer.
In this playback mode, the low frequency range
expand more uniformly through the room, but
depending on the size and shape of the room,
interference may result in a decrease of the
actual volume of the low frequency range.
By selecting MIX, the low frequencies will play
through the main L&R ONLY.
Note:
LFE signals during playback of Dolby Digital or
DTS, will be played through the subwoofer.
2-3 SPEAKERS DISTANCE
Use this parameter to specify the distance of each
speakers position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR7500
and todays sound systems are able to produce.
Note:
For speakers that you have selected NONE the
Speaker Configuration sub-menu will not appear
here. (There are several useful books and special
DVD and LDs available to guide you through
proper home theater configuration. If you are
unsure, have your Marantz dealer perform the
installation for you. They are trained
professionals familiar with even the most
sophisticated custom installations. Marantz
recommends the WWW.CEDIA.ORG website for
further information about this).
2-4 SPEAKERS LEVEL
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level. We recommend using a SPL (Sound
Pressure Level) meter, when available.
Note:
The speaker level settings are not available in 7.1
channel input mode and Pure-Direct mode.
TEST MODE:
Selects MANUAL or AUTO for generating
the mode of the test tone with the or cursor
buttons.
If you select AUTO , the test tone will be cycled
through in a circular pattern which is Left Center
Right Surround Right Surround Back Right
Surround Back Left Surround Left
Subwoofer Left .. increments of 3 seconds
for each channel.
Using the or cursor buttons, adjust the volume
level of the noise from the speaker so that it is the
same level for all the speakers.
If you select MANUAL, adjust the output level of
each speaker as listed below.
1.
When you move the cursor to FRONT L by
pressing the cursor button, the SR7500 will
emit a pink noise from the front left speaker.
Remember the level of this noise and then
press the cursor button.
(Note that this can be adjusted to any level
between -10 and +10 dB in 1 dB intervals
except the subwoofer setting. The subwoofer
can be adjusted to any level between -15 and
+10 dB in 1 dB intervals.)
The SR7500 will now emit the pink noise from
the center speaker.
2.
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker.
2 - 4 SPEAKERS LEVEL
T EST MODE : MANUAL
FRONT L : +10 dB
CENTER : 0 dB
FRONT R : +10 dB
SURR . R : + 6 dB
SURR . B R : - 1 0 dB
SURR . B L : - 1 0 dB
SURR . L : + 6 dB
SUB W : - 15 dB
MA I N RETURN EX I T
1.
Select either m (meters) or ft (feet) for
DISTANCE UNIT.
2.
To select each speaker, press the or
cursor buttons.
3.
To set the distance for each speaker , press
the or cursor buttons.
4.
After you complete this portion of the set up,
move the cursor to NEXT with the or
cursor buttons and then press the ENTER
button to go to the next page.
FRONT L:
Set the distance from the front left speaker to
your normal listening position.
FRONT R:
Set the distance from the front right speaker to
your normal listening position.
CENTER:
Set the distance from the center speaker to your
normal listening position.
SURR. L:
Set the distance from the surround left speaker
to your normal listening position.
SURR. R:
Set the distance from the surround right speaker
to your normal listening position.
SUB W:
Set the distance from the subwoofer to your
normal listening position.
SURR. B L:
Set the distance from the surround back left
speaker to your normal listening position.
SURR. B R:
Set the distance from the surround back right
speaker to your normal listening position.
Notes:
Set the distance to each speaker in meters (m) or
feet (ft) as follows.
m: 0.1 - 9.0 m in .01 m steps
ft: 0.3 - 30.0 ft in 0.3 ft steps
For the speakers that you have selected NONE
the Speaker Size menu will not appear.
The setting for Surr.Back L and Surr.Back R
appears if you set for it to, two surround back
speakers in the Speaker Size menu.
The setting of Surr.Back appears if it is set for one
surround back speaker in the Speaker Size menu.
3.
Press the cursor button again. The SR7500
will now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
After you complete this portion of the set up, press
the ENTER button, the cursor will move to MAIN
and then press the ENTER button to go to SETUP
MAIN MENU.
Notes:
Speakers that you selected NONE for in the
Speaker Size menu will not appear.
The setting of Surr.Back L and Surr.Back R
appears if you have set it for two surround back
speakers in the Speaker Size menu.
The setting of Surr.Back appears if you have set it for
one surround back speaker in the Speaker Size menu.
To adjust the speaker levels for 7.1-channel input
sources, you will need to use the 7.1CH-INPUT
sub menu. (See page 23).
2 - 3 SPEAKERS D I STANCE
D I STANCE UN I T : m
FRONT L : 4 . 5 m
FRONT R : 4 . 5 m
CENTER : 5 . 4 m
SURR . L : 8 . 7 m
SURR . R : 6 . 4 m
SUB W : 0 . 1 m
SURR . B L : 3 . 2 m
SURR . B R : 9 . 0 m
MA I N RETURN NEXT EX I T
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Comments to this Manuals

No comments