Marantz SR5008 Owner's Manual download pdf (Page 119)

119

Appendix

Tips

Settings

Connections

Contents

Front panel Display Rear panel IndexRemote

Playback

HDMI control function

A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with

another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability.

Setting procedure

Set the HDMI output connector corresponding with the

HDMI control function.

Set “HDMI Control” (vpage150) to “On”.

Turn the power on for all the devices connected by

HDMI cable.

Set the HDMI control function for all devices connected

by HDMI cable.

•Please consult the operating instructions for the connected

devices to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

Switch the television input to the HDMI input connected

to this unit.

Switch this unit input to the HDMI input source and

check if the picture from the player is ok.

When you turn the TV’s power to standby, check that

the power of this unit also goes to standby.

NOTE

•Some functions may not operate depending on the connected TV or player. Check

the owner’s manual of each device for details beforehand.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 237 238

No comments

Marantz SR5008 Owner's Manual Page 119