Marantz SR5008 Owner's Manual download pdf (Page 170)

170

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Distances

Set distance from listening position to speakers.

Measure beforehand the distance from the listening position to each

speaker.

2 Unit

Set the unit of distance.

Feet (Default)

Meters

2 Step

Set the minimum variable width of the distance.

1ft (Default) / 0.1ft

0.1m / 0.01m

2 Set Defaults

The “Distances” settings are returned to the default settings.

2 Set the distance

0.0ft – 60.0ft / 0.00m – 18.00m

•The speakers that can be selected dier depending on the “Amp Assign”

(vpage167) and “Speaker Conﬁg.” (vpage168) settings.

•Default settings :

Front L / Front R / F. Height L / F. Height R / Center / Subwoofer : 12.0 ft (3.60

Surround L / Surround R / Surr.Back L / Surr.Back R : 10.0 ft (3.00 m)

•Set the dierence in the distance between the speakers to less than 20.0 ft

(6.00 m).

Levels

Set the volume of the test tone to be the same when it is output from

each speaker.

2 Test Tone Start

Output test tone. A test tone is output from the selected speaker.

While listening to the test tone, adjust the volume output from the

selected speaker.

–12.0dB – +12.0dB (Default : 0.0dB)

•When “Levels” is adjusted, the adjusted values are set for all the sound

modes.

•When headphones are connected to the PHONES connector on this unit, you

cannot set “Levels”.

2 Set Defaults

The “Levels” settings are returned to the default settings.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 237 238

Comments to this Manuals

No comments

Marantz SR5008 Owner's Manual Page 170

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR5008