Marantz SR6006 Owner's Manual Page 108

  • Download
  • Add to my manuals
  • Print
  • Page
    / 153
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 107
105
SYSTEM SETUP
Setting items Setting details
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control.
Control : Set the HDMI control function.
•ON : Use HDMI control function.
•OFF : Do not use HDMI control function.
•When a device that is not compatible with the HDMI control function is
connected, set “HDMI Control” – “Control” to “OFF”.
•Please consult the operating instructions for each connected device to
check the settings.
•Refer to “HDMI control function” (vpage 68) for more information
about the HDMI control function.
NOTE
•When “HDMI Control” – “Control” is set to “ON”, it consumes more
standby power. If you are not using this unit for an extended period, it
is recommended that you unplug the power cord from the power outlet.
•“HDMI Control” does not work when the power to the device is off.
Either turn power on or set to standby.
•The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
•If the “HDMI Control” – “Control” settings have been changed, always
reset the power to connected devices after the change.
Standby Source : Sets the HDMI input source to put into standby when
the power is on.
•Last : This item is set at the last-used input source.
•HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 / HDMI7 : Put the
respective input source into standby.
“Standby Source” can be set when “HDMI Control” – “Control” is set
to “ON”.
Setting items Setting details
HDMI Control
(Continued)
Control Monitor : Set the HDMI MONITOR terminal to output the HDMI
control signal.
•Monitor 1 : Output from the MONITOR 1 terminal.
•Monitor 2 : Output from the MONITOR 2 terminal.
•“Control Monitor” can be set when “HDMI Control” – “Control” is set
to “ON”.
•ARC function works only with the terminal selected by “Control
Monitor”.
Power Off Control : Links the power standby of this unit to external
devices.
•All : If power to a connected TV is turned off independently of the input
source, power to this unit is automatically set to standby.
•Video : If power to a connected TV is turned off when the input source
is BD / DVD / VCR / SAT / GAME / AUX1 / AUX2, power to this unit is
automatically set to standby.
•OFF : This unit does not link with power to a TV.
“Power Off Control” can be set when “HDMI Control” – “Control” is
set to “ON”.
Basic version
Advanced version
Information
Advanced version
BD
Page view 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 152 153

Comments to this Manuals

No comments