Marantz SR6006 Owner's Manual download pdf (Page 71)

n HDMI control function (vpage68)

n Sleep timer function (vpage69)

n Adjusting the volume of the speakers

(vpage70)

n AirPlay (vpage71)

n Party mode function (vpage72)

n Zone Management function (vpage73)

n Operating a media controller to play music and still

pictures (vpage74)

n Web control function (vpage75)

n Dual backup memory function (vpage77)

n Panel lock function (vpage77)

n Various memory functions (vpage78)

Playback (Basic operation) (vpage27)

Settings (vpage20)

Selecting a listening mode (SURROUND MODE)

(vpage50)

Playback (Advanced operation)

Convenient functions

HDMI control function

If you connect the unit and an HDMI control function compatible TV or

player with an HDMI cable and then enable the HDMI control function

setting on each device, the devices will be able to control each other.

nOperations possible by HDMI control

•This unit power off can be linked to the TV power off step.

•You can switch audio output devices with a TV operation.

When you set “Output audio from amp” in the TV audio output

setup operation, you can switch the amp power on.

•You can adjust this unit volume in the TV volume adjustment

operation.

•You can switch this unit input sources through linkage to TV

input switching.

•When playing the player, this unit input source switches to the

source for that player.

•If you switch the input source of the unit to “TV”, you can

play TV audio with this unit (vpage7 “About ARC (Audio

Return Channel) function”).

•When “HDMI Control” – “Control” (vpage105) in the menu

is set to “ON”, signals input to the HDMI input connector are

output to the television or other device connected to the HDMI

output connector, even if the power of this unit is in standby

(pass-through function).

•To play the audio of a TV that does not support the ARC function

with the unit, connect the TV with an optical digital connection.

•To use the pass-through function, connect an HDMI connection

device that is compatible with HDMI control.

nSetting procedure

Set the HDMI output connector corresponding with

the HDMI control function.

Set “HDMI Control” – “Control” (vpage105) to “ON“.

Turn the power on for all the devices connected by

HDMI cable.

Set the HDMI control function for all devices

connected by HDMI cable.

•Please consult the operating instructions for the connected devices

to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

Switch the television input to the HDMI input

connected to this unit.

Switch this unit input to the HDMI input source and

check if the picture from the player is ok.

When you turn the TV’s power to standby, check

that the power of this unit also goes to standby.

If the HDMI control function does not operate properly, check the

following points.

•Is the TV or player compatible with the HDMI control function?

•Is “HDMI Control” – “Control” (vpage105) set to “ON”?

•Is “Power Off Control” (vpage105) set to “All” or “Video”?

•Is “Control Monitor” (vpage 105) set for the monitor output

connected to television?

•In the case of dual monitor connection, is “Control Monitor”

(vpage105) on the menu set to a monitor without HDMI control?

•Are the HDMI control function settings of all devices correct?

Basic version

Advanced version

Information

Advanced version

vSee overleaf

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 152 153

Comments to this Manuals

No comments

Marantz SR6006 Owner's Manual Page 71

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6006