Marantz SR6008 Owner's Manual download pdf (Page 178)

178

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Bass

Set subwoofer and LFE signal range playback.

2 Subwoofer Mode

Select low range signals to be reproduced by subwoofer.

LFE (Default) : The low range signal of the channel set to “Small”

speaker size is added to the LFE signal output from the

subwoofer.

LFE+Main : The low range signal of all channels is added to the LFE

signal output from the subwoofer. This is usually the best

setting for most systems.

•“Subwoofer Mode” can be set when “Speaker Conﬁg.” – “Subwoofer”

(vpage174) is set to other than “No”.

•Play music or a movie source and select the mode oering the strongest

bass.

•If “Front” and “Center” for “Speaker Conﬁg.” (vpage174) are set to

“Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output

from the subwoofers, depending on the input signal or selected sound mode.

Select “LFE+Main” if you want the bass signals to always be produced from

the subwoofer.

2 LPF for LFE

Set LFE signal playback range. Set this when you want to change the

playback frequency (low pass ﬁlter point) of the subwoofer.

80Hz / 90Hz / 100Hz / 110Hz / 120Hz (Default) / 150Hz / 200Hz / 250Hz

Front Speaker

Set the front speakers to use.

•This can be set when “Assign Mode” (vpage173) is set to “Front B”.

A (Default) : Front speaker A is used.

B : Front speaker B is used.

A+B : Both front speakers A and B are used.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 246 247

No comments

Marantz SR6008 Owner's Manual Page 178