Marantz RX9001 User's Guide download pdf (Page 12)

RX9001 User Guide

Configuration switch: 1

Inserting a Multimedia Server in the Network

You can add an Escient Media Server or an Imerge Sound Server to your network.

1 Connect the Server to the router.

2 Open Wizz.it Ex.

3 Open the configuration file.

4 To insert a Multimedia Server in the configuration file, click the ‘Insert Escient Media

Server’ button or the ‘Insert Imerge Sound Server’ button.

5 Open the Multimedia Server Properties.

6 Adjust the settings of the Multimedia Server:

• If the Multimedia Server has a fixed IP-address, fill in that IP-address.

• If it has a dynamic IP-address, fill in its host name.

Connecting the Extender to the Network

The Extender is normally ready for use and does not need to be configured. The settings need only

be adjusted in case you wish to operate the Extender with a fixed IP-address, or if there is more

than one Extender in the Wireless Network.

Note Before you start using or configuring the Extender, check if any firmware updates are available

in the Downloads section on http://www.marantz.com

in the Home Entertainment section of

your region.

Refer to the chapter ‘Firmware Update’ on page 13 for further details.

Using the Extender

1 Connect the Extender to the router with a straight Ethernet cable.

2 Set the Extender ID switch to 1 or to an ID that is not yet used by another Extender in

the Wireless Network.

3 Set the Configuration switch to 1 for use:

Extender

Straight

Ethernet cable

Router

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Marantz RX9001 User's Guide Page 12