Marantz SR6001 User Manual download pdf (Page 39)

ENGLISH

SUB W:

Set the distance from the subwoofer to your

normal listening position.

SURR. B L:

Set the distance from the surround back left

speaker to your normal listening position.

SURR. B R:

Set the distance from the surround back right

speaker to your normal listening position.

Notes:

• Set the distance to each speaker in meters (m) or feet

(ft) as follows.

m: 0.03 - 9.15 m in 0.03 m steps

ft: 0.1 - 30.0 ft in 0.1 ft steps

(The values appearing on the FL display are

approximate.)

• For the speakers that you have selected “NONE” the

speaker size menu will not appear.

• The setting for surr.back L and surr.back R appears

if it is set, two surround back speakers in the

SPEAKER SIZE menu.

• The setting of SURR. BACK appears if it is set for

one surround back speaker in the SPEAKER SIZE

menu.

11.

After you complete this portion of the setup,

move the cursor to “NEXT” with the 3, 4, 1 and

2 cursor buttons and press the ENTER button

to go to the next page.

S PEAKER LEVEL

TES T MODE : MANUAL

FRONT L : 0.0dB

CENTER : 0.0dB

FRONT R : 0.0dB

S URR.R : 0.0dB

S URR.B R : 0.0dB

S URR.B L : 0.0dB

S URR.L : 0.0dB

S UB W : 0.0dB

RETURN BACK EXIT

Here you can set the volume for each speaker so that

they are all heard by the listener at the same level.

We recommend holding a dB SPL (Sound Pressure

Level) meter at the listening position, at arms length,

and pointing straight up at the ceiling, adjust the level

of each speaker in turn unit it reads 75dB SPL when

the meter is set to “C” weighting and Slow responce.

Note:

• The speaker level settings are not available in 7.1

Channel Input mode, Pure Direct mode and Source

Direct mode.

TEST MODE:

Select “MANUAL” or “AUTO” generation of the test

tone with the 1

2 cursor buttons.

If you select “AUTO”, the test tone will be cycled

through in a circular pattern beginning at Left →

Center → Right → Surround Right → Surround

Back Right → Surround Back Left → Surround

Left → Subwoofer → Left, in 2 seconds increments

for each channel.

Using the 1

2 cursor buttons, adjust the volume

level of the noise from the speaker so that it is the

same level for all the speakers.

If you select “MANUAL”, adjust the output level of

each speaker as listed below.

12.

Move the cursor to FRONT L by pressing the

4 cursor button. The SR6001 will emit a pink

noise from the front left speaker.

Remember the level of this noise and then

press the 4 cursor button.

(Note that this can be adjusted to any level

between -12 and +12 dB in 0.5 dB increments.)

The SR6001 will now emit the pink noise from

the center speaker.

13.

Using the 1 and 2 cursor buttons, adjust the

volume level of the noise from the center

speaker so that it is the same level as the front

left speaker.

14.

Press the 4 cursor button again. The SR6001

will now emit the pink noise from the front right

speaker.

15.

Repeat steps 13 and 14 for the front right and

other speakers until all speakers are adjusted

to the same volume level.

After you complete this portion of the setup, press the

ENTER button to move the cursor to “RETURN”. Press

the ENTER button to go to “2. SPKR SETUP”.

Notes:

• Speakers for which you selected “NONE” in the

SPEAKER SIZE menu will not appear.

• Surr. Back L and Surr. Back R appear if it is set for

two surround back speakers in the SPEAKER SIZE

menu.

• Surr. Back appears if it is set for one surround back

speaker in the SPEAKER SIZE menu.

• To adjust the speaker levels for 7.1 channel input

sources, you will need to use the 7.1 Ch Input sub

menu. (See page 36)

• SUB W can be set from –18dB to +12dB.

SR6001N DFU_1_ENG 2_4.indd 35SR6001N DFU_1_ENG 2_4.indd 35 06.12.21 3:10:57 PM06.12.21 3:10:57 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Comments to this Manuals

No comments

Marantz SR6001 User Manual Page 39

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6001