Marantz SR6001 User Manual download pdf (Page 48)

ENGLISH

TEMPORARILY TURNING OFF THE SOUND

CAT

+10

HT-EQ

MULTI/

SPKR A/B

ENTER

INFO

CH/

M-SPKR

VOLUME

7.1CH IN

A/D

MEMO

MUTEMUTE

To temporarily silence all speaker outputs such as

when interrupted by a phone call, press the MUTE

button on the remote.

This will interrupt the output to all speakers and the

head-phone jack, but it will not affect any recording or

dubbing that may be in progress.

When the system is muted, the display will show

“MUTE” .

Press the MUTE button again to return to normal

operation.

USING THE SLEEP TIMER

T.MODE

123

456

SEND

INPUT

EX/ES

VIRTUAL

dts

P.DIRECT

OFF

SET

AUTO

SURROUND

DISPLAY

LEARN

LIP SYNC/

SOURCE

SLEEPSLEEP

BAND

To program the SR6001 for automatic standby, press

the SLEEP button on the remote.

Each press of the button will increase the time before

shut down in the following sequence.

OFF 10 20 30 40

90 80 70 60 50

The sleep time will be shown for a few seconds in the

display on the front panel, and it will count down until

the time has elapsed.

When the programmed sleep time has elapsed, the

unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and the

SLEEP indicator will disappear.

VIDEO CONVERT

ANALOG VIDEO CONVERSION

The SR6001 is equipped to convert video signals

for monitor output. Because of this, indifferent of

the connection (VIDEO, S-VIDEO, COMPONENT

VIDEO) between the playback device and the

SR6001, listening and viewing are possible with a

single higher grade cable between the MONITOR

OUT terminal of the SR6001 and the monitor.

UP-CONVERSION FROM ANALOG VIDEO

SIGNALS TO HDMI

The up-conversion feature of the SR6001 can output

the input analog video signals (for component video

signals of 480i, 576i, 480p, 576p, 1080i and 720p

resolution, and S-Video and Video (composite)

of 480i, 576i resolution) to the HDMI MONITOR

terminal.

Notes:

• HDMI video input is only output to the HDMI

MONITOR OUT terminal of the SR6001. If

connecting a playback device such as a DVD

player to the HDMI input jack, connect the HDMI

MONITOR OUT terminal of the SR6001 to a TV

monitor.

• This mode is unavailable for the REC out terminal.

• This mode is unavailable for still picture, fast

forward and reverse play on video component.

•

If, while attempting to use the video convert feature,

the SR6001 cannot synchronize with the display

device, “NO SIGNAL” appears on the monitor or

noise is generated, this feature cannot be used. All of

these signs are caused by equipment incompatibility;

there is nothing wrong with the SR6001.

If this occurs, set “VIDEO CONVERT” in the

“VIDEO SETUP” menu to “DISABLE”. Next,

connect the video input signal to the display component

via the MONITOR OUT terminal under VIDEO and

the S-video input signal to the display component via

the MONITOR OUT terminal under S-VIDEO.

• The video convert feature constantly monitors

input video signals and determines whether to

convert the input signals or not. However, some

input video signals cannot be detected correctly.

If this occurs, set “VIDEO CONVERT” in the

“VIDEO SETUP” menu to “DISABLE”.

CONNECTION EXAMPLE

• When a monitor is connected to the HDMI

MONITOR OUT terminal of the SR6001

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

PURE DIRECT HT-EQ

7.1CH INPUT

MODE AUTO

MULTI

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

VIDEO

or S-VIDEO

or component

HDMI

or HDMI

Notes:

• If the resolution of the component video signal input

from the playback device is other than 480i, 576i,

480p, 576p, 1080i or 720p, images are not output

from the HDMI MONITOR OUT terminal of the

SR6001.

• If the resolution of the S-Video or Video signal input

from the playback device is other than 480i, 576i,

images are not output from the HDMI MONITOR

OUT terminal of the SR6001.

• When a monitor is connected to the VIDEO or S-

VIDEO MONITOR OUT terminals of the SR6001

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

PURE DIRECT HT-EQ

7.1CH INPUT

MODE AUTO

MULTI

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

SL S SR

LFE

DIGITAL

SURROUND

V-OFFDISP MULTI AUTO TUNED STSPKR A B

NIGHT

PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR DIRECT

AUTO

DISC 6.1 MTX 6.1 EQ

PCM

AAC

VIDEO

or S-VIDEO

VIDEO

or S-VIDEO

or component

HDMI

Notes:

• The HDMI video signal input from the playback

device is not output from the VIDEO or S-VIDEO

MONITOR OUT terminals of the SR6001.

• If the resolution of the component video signal

input from the playback device is other than 480i,

576i, it is not output from the VIDEO or S-VIDEO

MONITOR OUT terminals of the SR6001.

• When a monitor is connected to the COMPONENT

VIDEO MONITOR OUT terminal of the SR6001

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

PURE DIRECT HT-EQ

7.1CH INPUT

MODE AUTO

MULTI

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

VIDEO

or S-VIDEO

component

or component

HDMI

Notes:

• The HDMI video signal input from the playback

device is not output from the COMPONENT

VIDEO MONITOR OUT terminal of the SR6001.

Notes of OSD menu system:

• The setup menu can be displayed through all

video out terminals (“HDMI”, “COMPONENT”,

“SVIDEO” and “VIDEO”).

• OSD information is output only to the VIDEO and

S-VIDEO MONITOR OUT terminals.

OSD information is also output when the video

conversion feature is on and the video signal input

to the VIDEO or S-VIDEO input jack of the SR6001

is converted and output from the COMPONENT

VIDEO or HDMI MONITOR OUT terminals.

I/P CONVERT

The video circuit of the SR6001 is equipped with an

I/P conversion feature.

When this feature is on, 480i, 576i analog video

signals (VIDEO, S-VIDEO or COMPONENT VIDEO)

input from a playback device can be converted

to 480p, 576p and progressively output to the

COMPONENT VIDEO or HDMI MONITOR OUT

terminals of the SR6001.

(For setting instructions, see page 38)

SR6001N DFU_1_ENG 3_4.indd 44SR6001N DFU_1_ENG 3_4.indd 44 06.12.21 3:11:41 PM06.12.21 3:11:41 PM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

Comments to this Manuals

No comments

Marantz SR6001 User Manual Page 48

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6001