Marantz SR6001 User Manual download pdf (Page 55)

ENGLISH

7.1 CH INPUT

The SR6001 is equipped for future expansion

through the use of Multi channel Super Audio CD

multichannel player or DVD-Audio player.

When this is selected, the input signals connected to

the L(front left), R (front right), CENTER, SL (surround

left), SR (surround right) and SBL (surround back left)

and SBR (surround back right) channels of the 7.1

CH. In jacks are output directly to the front (left and

right), center, surround (left and right) and surround

back speaker systems as well as the pre-out jacks

without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer)

jack is output to the PRE OUT SW (subwoofer) jack.

When 7.1 CH. INPUT is selected, the last video input

used remains routed to the Monitor Outputs.

This permits simultaneous viewing with video

sources

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

PURE DIRECT HT-EQ

7.1CH INPUT

MODE AUTO

MULTI

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

DISP MULTI AU TO TUNED ST SPKR

SLEEP

SURR DIRECT

AUTO

DISC 6.1

1. 2.

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

MultEQ A/B

MEMORY CLEAR

SPEAKERS

MIC

SL S SR

LFE

DIGITAL

SURROUND

TAPE

CAT

P.SCAN

CAT

T.DISP

F.DIRECT

PTY

TUNING

PRESET

789

+10

REMOTE CONTROLLER

RC5001SR

HT-EQ

MULTI/

SPKR A/B

ENTER

EXIT

INFO

CH/

T.TO NE

/SET UP

M-SPKR

MUTE

CDR

AMP

AUX2

TUNER

BASS

TREBLE

STEREO

NIGHT

M-CH ST

REC

AUDI O

ANGLE

SUB TITLE

DISC+

CH-SEL

V-OFF

ATT.

AUX1

A/D

MEMO

DVDDVD VCRVCR

DSSDSS

TVTV

VOLUMEVOLUME

7.1CH IN7.1CH IN

Select a desired Video source to decide the

routed video signal to the Monitor Outputs.

Press the 7.1 CH INPUT button on the front

panel or press 7.1 CH on the remote to switch

the 7.1 channel input.

If it is necessary to adjust the output level of

each channel, press the CH-SEL button on the

remote.

Adjust the speaker output levels so that you can

hear the same sound level from each speaker

at the listening position. For the front left, front

right, center, surround left, surround right and

surround back speakers, the output levels can

be adjusted between –12 to +12 dB.

The subwoofer can be adjusted between –18

and +12 dB.

These adjustments result will be stored to 7.1

CH. INPUT memory.

Adjust the main volume with the MAIN VOLUME

knob or the VOL buttons on the remote.

To cancel the 7.1 CH. INPUT setting, press the 7.1

CH INPUT button on the front panel or press 7.1 CH

on the remote.

Notes:

• When the 7.1 CH. Input is in use, you may not select

a surround mode, as the external decoder determines

processing.

• In addition, there is no signal at the record outputs

when the 7.1 CH. Input is in use.

AUX2 INPUT

If you don’t need to connect 7.1 Ch. input terminals

with multi channel decoder,

L(front left) and R (front right) inputs terminals are

available as AUX2 input.

In this case, You can connect additional audio source

to AUX2 as other audio input terminals.

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

PURE DIRECT HT-EQ

7.1CH

MODE AUTO

MULTI

PURE DIRECT

SURROUND

DSD

POWER ON/OFF

DISP MULTI AU TO

SLEEP

SURR

AUTO

LIP.SYNC

Depending on the image device (TV, monitor,

projector, etc.) connected to the SR6001, a time lag

can occur between image signal processing and

audio signal processing. Though minor, this time

lag can interfere with movie and music enjoyment.

The LIP.SYNC feature delays the audio signal with

respect to the image signal output from the SR6001

to correct the time lag between the sound and image.

It can be operated with the “LIP SYNC” and 1 and

2 cursor buttons of the remote controller. Set the

remote controller to the AMP mode before operating

the LIP.SYNC feature. The initial setting is OFF (0

ms).The time lag can be adjusted in 10 ms steps up

to 200 ms.

Watch the picture on the image device (i.e., TV,

monitor, projector, etc.) as you adjust the time lag.

Note:

• The LIP.SYSNC feature turns OFF (0 ms) in

the SOURCE/PURE DIRECT mode. When the

SOURCE/PURE DIRECT mode is deactivated, the

set value of the LIP.SYSNC feature is automatically

restored.

CAT

P. SC A N

CAT

T.MODE

T.DISP

F.DIRECT

PTY

123

456

789

+10

HT-EQ

MULTI/

SPKR A/B

ENTER

EXIT

INFO

CH/

INPUT

T.T ONE

/SET UP

M-SPKR

MUTE

EX/ES

VIRTUAL

dts

P.DIRECT

STEREO

NIGHT

M-CH ST

AUTO

SURROUND

SLEEP

DISPLAY

REC

A/D

LIP SYNC/

MEMO

VOLUMEVOLUME

7.1CH IN7.1CH IN

BAND

SR6001N DFU_1_ENG 3_4.indd 51SR6001N DFU_1_ENG 3_4.indd 51 06.12.21 3:11:45 PM06.12.21 3:11:45 PM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Comments to this Manuals

No comments

Marantz SR6001 User Manual Page 55

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6001