Marantz SR8002 User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
ENGLISH
54
5 PREFERENCE
MULTI ROOM SETUP :
“5-1 MULTI ROOM SETUP”
(see page 55)
DC TRIGGER SETUP :
“5-2 DC TRIGGER SETUP”
(see page 55)
1.
Select 5. PREFERENCE” from MAIN MENU
with the 3
or
4 cursor buttons and press the
OK/ENTER button.
5.PREFERENCE
MULTI ROOM SETUP A B
DC TRIGGER SETUP 1 2
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
HDMI LIP : ENABLE
RETURN NEXT EXIT
2.
Select the desired menu with the 3
or
4 cursor
buttons and press the OK/ENTER button.
STAND BY:
When this is set to “ECONOMY”, you can reduce
the power consumption when the unit is in the
Standby mode. When ECONOMY is selected,
TV AUTO and “RS-232C are disabled when the
unit is in the Standby mode.
BILINGUAL:
In the Bilingual mode, Dolby Digital and DTS
output is set to either “MAIN” orSUB”. Select
BILINGUAL” with the 1 or 2 cursor buttons, then
select MAIN SUB MAIN+SUB with the 1 or
2 cursor buttons.
HDMI AUDIO:
This setting determines whether to play back audio
input to the HDMI jacks through the unit or output it
through the unit to a TV or projector.
ENABLE: The audio input to the HDMI jacks
can be played back by this unit.
In such case, audio signals are not
output to the TV or projector.
THROUGH: The audio input to the HDMI jacks is
not output from the speaker terminals
of the unit. Audio data is output
directly to the TV or projector. This
setting is used to listen to audio on a
multi channel TV, etc.
After you complete this portion of the setup, move the
cursor to “RETURN with the 3, 4, 1 and 2 cursor
buttons and press the OK/
ENTER
button.
(The SR7002 is not equipped
with the MULTI ROOM SETUP
B feature)
DC TRIGGER SETUP
DC TRIG-1:DISABLE
TV : TAPE :
DVD : CD/R :
VCR1 : AUX2 :
DSS : TUNER :
AUX1 : 7.1CH :
RETURN BACK EXIT
DC TRIGGER SETUP
DC TRIG-2:DISABLE
TV : TAPE :
DVD : CD/R :
VCR1 : AUX2 :
DSS : TUNER :
AUX1 : 7.1CH :
RETURN BACK EXIT
MULTI ROOM SETUP B
AUDIO :DVD
SLEEP :OFF
MONO/ST:STEREO
MULT:OFF MSPK:
VOL :VARI VOL :
LEV :-90dB LEV :
RETURN BACK EXIT
MULTI ROOM SETUP A
VIDEO :DVD
AUDIO :DVD
SLEEP :OFF
MONO/ST:STEREO
OSD INFO:ENABLE
MULT:OFF MSPK:
VOL :VARI VOL :
LEV :-90dB LEV :
RETURN BACK EXIT
5.PREFERENCE
MULTI ROOM SETUP A B
DC TRIGGER SETUP 1 2
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
HDMI LIP : ENABLE
RETURN NEXT EXIT
HDMI LIP (Auto Lipsync Correction):
Video signals may take longer to process than
audio signals depending on the connected video
equipment.
When the unit is connected to TV or Projector
supporting Auto Lipsync Correction in HDMI
1.3a, audio and video can be automatically
synchronized using this function.
Use the 1 or 2 cursor buttons to switch between
ENABLE and DISABLE.
ENABLE: Auto Lipsync Correction is used to
synchronize audio and video.
DIESABLE: Deactivates this function.
Note:
This function is not available when the unit is
connected to equipment that does not support HDMI
1.3a or Auto Lipsync Correction. For details, check
the users manual of the connected equipment.
If this function is unavailable, you can use the
regular lipsync function to synchronize audio and
video. (See page 66)
SR7002-8002_U_01_ENG 2_3.indd 54SR7002-8002_U_01_ENG 2_3.indd 54 07.8.24 1:15:26 PM07.8.24 1:15:26 PM
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 93 94

Comments to this Manuals

No comments