Marantz SR6008 Owner's Manual download pdf (Page 200)

200

Appendix

SettingsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Tips

Symptom Cause/Solution Page

No audio is output from PRE OUT or

speakers for ZONE2.

•In ZONE2, the audio can be played back when signals input from digital terminals (OPTICAL/

COAXIAL) are in 2ch PCM format.

•In ZONE2, the audio can be played back when signals input from the HDMI terminal are in

2ch PCM format. To play back the audio in ZONE2 irrespective of the input signal format, set

the “HDMI Audio” setting in the menu to “PCM”. Depending on the played back device, the

audio may not be played back even with this setting. In that case, set the audio format to

“PCM (2ch)” on the played back device.

–

184

2 Sound is interrupted or noise occurs

Symptom Cause/Solution Page

During playback from the Internet

radio or USB memory device, sound

is occasionally interrupted.

•When the transfer speed of the USB memory device is slow, sound may occasionally be

interrupted.

•The network communication speed is slow or the radio station is busy.

–

When making a call on iPhone, noise

occurs in audio output on this unit.

•When making a call, keep a distance of 20 cm or longer between iPhone and this unit. –

Noise often occurs in FM/AM

broadcasting.

•Change the antenna orientation or position.

•Separate the AM loop antenna from the unit.

•Use an FM outdoor antenna.

•Separate the antenna from other connection cables.

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 246 247

No comments

Marantz SR6008 Owner's Manual Page 200