Marantz SR8002 User Manual download pdf (Page 42)

ENGLISH

a RS232C

Connect an external control device or other device for

servicing. (Use a straight cable for the connection.)

s DC OUT (DC TRIGGER)

External devices can be controlled from the unit

by connecting them to the DC OUT terminal (12 V

44mA max).

d EMITTER OUT (SR8002 Only)

Outputs the remote control signal input to the IR

RECEIVER IN terminals. External components can

be controlled by connecting them to the EMITTER

OUT terminal.

f FLASHER IN

This unit can be controlled by connecting a control

box or other control device to this unit.

f d

CONNECTING OTHER EQUIPMENT

g IR RECEIVER IN (SR8002 Only)

This unit can be operated by remote controller

without using the internal IR receiver, by connecting

an external IR receiver.

An IR receiver is connected as shown above.

Caution:

• Wrongly connecting an IR receiver or connecting

an IR receiver of the wrong voltage can damage the

unit, therefore do not do this.

• 50 mA of current are supplied to the device connected

to the IR RECEIVER IN terminal.

• Connecting a device that requires more than 50

mA of current to this unit will damage this unit.

Before using other devices, carefully check the

speciﬁ cations of those devices.

+12V

GND

Signal

SR7002-8002_U_01_ENG 2_3.indd 39SR7002-8002_U_01_ENG 2_3.indd 39 07.8.24 1:15:21 PM07.8.24 1:15:21 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 93 94

No comments

Marantz SR8002 User Manual Page 42