Marantz SR7002 User Manual download pdf (Page 68)

ENGLISH

DOLBY HEADPHONE MODE

This feature simulates the waveforms of the actual

sounds heard from the speakers.

When headphones are used, the MENU button

automatically switches to the Dolby headphone

mode.

The OSD that appears when the MENU button is

pressed is shown below.

HEAD PHONE

DOLBY HP MODE :DH

SURROUND :PL

II MV

L LEVEL :+10.0dB

R LEVEL : 0.0dB

DOLBY HP (Headphone) MODE can be selected

with the left and right cursor buttons.

BYPASS → DH (DOLBY Headphone) → BYPASS

BYPASS: Bypasses the Dolby headphone mode

and delivers ordinary 2-channel stereo.

DH: Dolby Headphone is a signal processing

system that delivers a sound similar to

room speakers.

It makes it possible to experience the

volume and space of a 5-channel

surround system using ordinary stereo

headphones.

When the PURE DIRECT mode is selected, Dolby

surround processing is bypassed and “✽✽✽” is

displayed as the mode indication.

The surround mode can be selected when the

modes in DH is selected.

L/R LEVEL can be set in the ±12 dB range.

Notes:

• The surround mode returns to the previous setting as

soon as the plug is removed from the jack.

• In headphone mode, Tone Control and ACOUSTIC

EQ are not available.

ATTENUATION TO ANALOG INPUT SIGNAL

2 31

5 64

MEMO

CLEAR

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP.SYNC

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

THX

SLEEP

ATT

If the selected analog audio input signal is greater

than the capable level of internal processing, the

“PEAK” indicator will light up on the front display. If

this happens, you should press the ATT button on

the remote controller.

“ATT” indicator will be illuminated when this function

is activated. The signal-input level is reduced by

about half. Attenuation will not work with the output

signal of TAPE-OUT, CD/CD-R, VCR1-OUT and

DSS/VCR2-OUT.

This function is memorized for each individual input

source.

SPEAKER A/B

DIGITAL

VIDEO

S-VIDEO

AUX 1 INPUT

VOLUME

DOWN

M-DAX

ENTER

7.1CH INPUT

MULTI

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

SPEAKER

MULTI

SL S SR

LFE

DIGITAL

SURROUND

V-OFF

LTI AUTO TUNED ST SPKR A B

NIGHT

PEAK ANALOG

DIGITAL

ATT

SURR DIRECT

AUTO

DISC 6.1 MTX 6.1 EQ

PCM

AAC

2 31

5 64

MEMO

CLEAR

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP.SYNC

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

THX

SLEEP

SPK-AB

This unit has speaker system - A and speaker

system- B for front L/R channels.

You can select these systems by pressing

SPEAKERS A/B button on the front panel or SPK-

AB on the remote controller.

7.1 CH INPUT

This unit is equipped for future expansion through the

use of Multi channel Super Audio CD multichannel

player or DVD-Audio player.

When this is selected, the input signals connected to

the L(front left), R (front right), CENTER, SL (surround

left), SR (surround right) and SBL (surround back left)

and SBR (surround back right) channels of the 7.1

CH. In jacks are output directly to the front (left and

right), center, surround (left and right) and surround

back speaker systems as well as the pre-out jacks

without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer)

jack is output to the PRE OUT SW (subwoofer) jack.

When 7.1 CH. INPUT is selected, the last video input

used remains routed to the Monitor Outputs.

This permits simultaneous viewing with video

sources

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR8002

PURE DIRECT THX

7.1CH INPUT

MODE AUTO

MULTI

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

DISP MULTI AUTO TUNED ST SPKR

SLEEP

SURR DIRECT

AUTO

DISC 6.1

1. 2.

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

M-DAX A/B

MEMORY CLEAR

SPEAKERS

MIC

SL S SR

LFE

DIGITAL

SURROUND

2 31

5 64

MEMO

CLEAR

VOL

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP.SYNC

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

THX

SLEEP

7.1CH

CH.SEL

Select a desired Video source to decide the

routed video signal to the Monitor Outputs.

Press the 7.1 CH INPUT button on the front

panel or press 7.1 CH on the remote controller

to switch the 7.1 channel input.

If it is necessary to adjust the output level of

each channel, press the CH.SEL button on the

remote controller.

Adjust the speaker output levels so that you can

hear the same sound level from each speaker

at the listening position. For the front left, front

right, center, surround left, surround right and

surround back speakers, the output levels can

be adjusted between –12 to +12 dB.

The subwoofer can be adjusted between –18

and +12 dB.

These adjustments result will be stored to 7.1

CH. INPUT memory.

Adjust the main volume with the MAIN

VOLUME knob or the VOL buttons on the

remote controller.

To cancel the 7.1 CH. INPUT setting, press the 7.1

CH INPUT button on the front panel or press 7.1 CH

on the remote controller.

Notes:

• When the 7.1 CH. Input is in use, you may not select

a surround mode, as the external decoder determines

processing.

• In addition, there is no signal at the record outputs

when the 7.1 CH. Input is in use.

• Furthermore, the following functions are not

available during 7.1 CH Input use.

Test Tone, NIGHT MODE, Source Direct, Pure

Direct, RE-EQ, Tone Control, Multi EQ

SR7002-8002_U_01_ENG 3_3.indd 65SR7002-8002_U_01_ENG 3_3.indd 65 07.8.24 1:16:05 PM07.8.24 1:16:05 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 93 94

Comments to this Manuals

No comments

Marantz SR7002 User Manual Page 68

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR7002