Marantz SR6001 User Manual download pdf (Page 12)

ENGLISH

y Speaker outputs terminals

(SURROUND BACK / MULTI

SPEAKER / SPEAKER C)

Two terminals are provided for the front left, and

right speakers for multi room (2nd zone) or surround

back.

The terminals can be used to connect a third set of

speakers by setting the SPEAKER C selector switch

to ON. For connection and use, see page 23.

u Speaker outputs terminals

Seven terminals are provided for the front (A) left,

front (A) right, front (B) left, front (B) right, front center,

surround left, and surround right speakers.

i SPEAKER C switch

Set to ON to connect a bi-amp to this receiver or set

to OFF for normal speaker connection (surround

back and multiroom speakers). (See page 23)

o AC OUTLETS

Connect the AC power cables of components such

as a DVD and CD player to these outlets. SWITCHED

terminal is provided.

The one marked SWITCHED provides power only

when the SR6001 is turned on and is useful for

components which you use every time you play your

system.

Caution:

• In order to avoid potential turn-off thumps, anything

plugged into these outlets should be powered up

before the SR6001 is turned on.

• The capacity of this AC outlet is 150W. Do not

connect devices that consume electricity more than

the capacity of these AC outlets. If the total power

consumption of the connected devices exceeds the

capacity, the protection circuit shuts down the power

supply.

!0 AC INLET

Plug the supplied power cord into this AC INLET and

then into the power outlet on the wall.

SR6001 can be powered by 230V AC only.

!1 Preamp Outputs

(L, R, SL, SR, SBL, SBR, C)

Jacks for L (front left), R (front right), C (Center), SL

(surround left), SR (surround right), SBL (surround

back left) and SBR (surround back right).

Use these jacks for connection to external power

ampliﬁ ers.

!2 Subwoofer Output

Connect this jack to the line level input of a powered

subwoofer. If an external subwoofer ampliﬁ er is used,

connect this jack to the subwoofer ampliﬁ er input.

If you are using two subwoofers, either powered or

with a 2 channel subwoofer ampliﬁ er, connect a “Y”

connector to the subwoofer output jack and run one

cable from it to each subwoofer ampliﬁ er.

!3 7.1 CHANNEL or AUX2 INPUT

By connecting a DVD Audio player, Super Audio CD

multichannel player, or other components that has a

multichannel port, you can playback the audio with

5.1 channel or 7.1 channel outputs.

FLASHER IN (Flasher input terminal)

These terminals are to control the unit from each

zone. Connect the control signal from a Keypad, etc.

!5 DC TRIGGER output terminal

Connect a device that needs to be triggered by DC

under certain conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the

conditions by which these jack will be active.

Note:

• This output voltage is for (status) control only, It is

not sufﬁ cient for drive capability.

MULTI ROOM REMOTE IN/OUT terminals

IN: Connect to a multi-room remote control

device, available from your Marantz dealer.

OUT: Connect to the Marantz component equipped

with remote control (RC-5) terminals in Multi

zone (Multi room).

!7 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

!8 AUDIO IN/OUT (TV, DVD, VCR,

DSS, TAPE, CD/CDR)

These are the analog audio inputs and outputs.

There are 6 audio inputs and 3 audio outputs. The

audio jacks are nominally labeled for cassette tape

decks, compact disc players, DVD players and etc....

The audio inputs and outputs require RCA-type

connectors.

REAR PANEL

e Multiroom Output (Audio output)

This is the audio output jack for the Multi zone (Multi

room).

Connect these jacks to optional audio power ampliﬁ ers

to listen the source selected by the multiroom system

in a remote room.

r MONITOR OUT

These are monitor outputs and each one includes

both composite video and S-video conﬁ gurations.

When connecting two video monitors or televisions,

be aware that the OSD interface can be used with

both MONITOR OUT connections.

t RS-232C

The RS-232C port is to be used in conjunction with

an external controller to control the operation of the

SR6001 by using an external device.

The RS-232C port may also be used in the future to

update the operating software of the SR6001 so that

it will be able to support new digital audio formats and

the like as they are introduced.

q FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial

cable, or a cable network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the

terminals marked “AM” and “GND”. The supplied AM

loop antenna will provide good AM reception in most

areas. Position the loop antenna until you hear the

best reception.

w COMPONENT VIDEO INPUT/

OUTPUT

If your DVD player or other device has component

video connectors, be sure to connect them to these

component video connectors on the SR6001. The

SR6001 has 4 component video input connectors to

obtain the color information (Y, C

, C

) directly from

the recorded DVD signal or other video component,

and 1 component video output connector to output

the information directly into the matrix decoder of the

display device.

By sending the pure DVD component video signal

directly, the DVD signal forgoes the extra processing

that normally would degrade the image. The result is

vastly increased image quality, with incredibly life like

colors and crisp detail.

(

)

GND AM

DC OUT

OUTPUT

COMPONENT

VIDEO

IN OUT

PRE

OUT

SLL

RSR

FLASHER

SPEAKER

SYSTEMS

INPUT 1

(

DVD

)

COAX.

DIGITAL IN

DIGITAL OUT

SURROUND

BACK

OUT

RS-232C

OUTPUT

TAPE CD/CD-R

OUTOUTIN

MULTI

DSS

(

AUX2

)

AUDIO

7.1CH

OPT.

DVD

(

)

DSS

(

)

(

)

VIDEO

OUT

VCR

(

)

OUTIN

RC-5 MULTI RC

INPUT 1

(

)

INPUT 4

(

DSS

)

VCR

INPUT 3

(

VCR

)

DVD SL

INPUT 2

(

DSS

)

ANTENNA

YYY

DVD

(

)

DSS

(

)

VCR

(

)

(

)

MONI. OUT

MONITOR

OUT

SBR

SBL

SBR

SBL

AC OUTLET

230V 50/60Hz

SWITCHED

0.65A 150W

AC IN

INPUT 2

(

DVD

)

S-VIDEO

MODEL NO. SR6001

FRONT

SURR

OUND

CEN

TER

FRONT

OFF

MULTI SPEAKER

SPEAKER C

FRONT A OR B.CENTER.SURR.

SURR BACK : 6 - 8 OHMS

FRONT A + B : 8 OHMS

HDMI

Ver1.2

rq twyu

io!0!1!3

!6!7

!5 !4

SR6001N DFU_1_ENG 1_4.indd 8SR6001N DFU_1_ENG 1_4.indd 8 06.12.21 3:09:57 PM06.12.21 3:09:57 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Comments to this Manuals

No comments

Marantz SR6001 User Manual Page 12

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6001