Marantz SR6001 User Manual download pdf (Page 44)

ENGLISH

5-1 MULTI ROOM SETUP

The SR6001 has source selectors, sleep timers and

multispeaker output remote control units for the other

rooms in the multi room system.

These features can be set from this menu.

Select “5. PREFERENCE” from the MAIN

MENU with the 3 or 4 cursor buttons and

press the ENTER button.

Select “MULTI ROOM SETUP” with the 3 or 4

cursor buttons.

Press the ENTER button to enter the setting.

The following explanation shows how to operate

MULTI ROOM of the multi-room system.

MULTI ROOM SETUP

AUDIO :DVD

SLEEP :OFF

MONO/ST:STEREO

MULT:OFF MSPK:

VOL :VARI VOL :

LEV :-90dB LEV :

RETURN BACK EXIT

Select the desired item with the 3

4 cursor

button.

AUDIO:

Select the audio source of the multiroom output

with the 1 or 2 cursor buttons.

SLEEP:

The sleep mode is available when the multiroom is

active, set the time with 1 or 2 cursor buttons. The

sleep timer can be set to a maximum 90 minutes

in 10 minute increments.

MONO/ST:

This mode switches audio output to the multi room

system between MONAURAL and STEREO,

using the 1 and 2 cursor buttons.

MULTI (MULTI ROOM):

Switch the multiroom output “ON” or “OFF” with the

1 or 2 cursor buttons.

MSPK (MULTI SPEAKER):

Switch the speaker output “ON” or “OFF” with the

1 or 2 cursor buttons.

VOL (VOLUME SETUP):

Select whether the multiroom or multi speaker

output level is variable or ﬁ xed with the 1 or 2

cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the multiroom output level with the 1 or 2

cursor buttons. The volume can be set between

-90 dB and 0 dB in 1 dB increments.

Note:

• This setting can be changed when the SURR B is

set to “NONE” in the SPEAKER SIZE menu and

“SPEAKER C” is in the OFF position on the rear

panel. When this setting is unavailable, “***” is

displayed.

• If “VOLUME” is set to “FIXED”, the multiroom

output level cannot be adjusted from the A or B

room.

5-2 DC TRIGGER SETUP

This unit has DC trigger control jack, which is linked

with input functions of main room or multiroom, and

controls DC trigger output.

Each trigger can be setup separately.

Select “5. PREFERENCE” from MAIN MENU

with the 3

4 cursor buttons and press the

ENTER button.

Select “DC TRIGGER SETUP” with the 3 and

4 cursor buttons.

Press the ENTER button to enter the

selection.

DC TRIGGER SETUP

DC TRIG:DISABLE

TV : TAPE :

DVD : CD/R :

VCR : AUX2 :

DSS : TUNER :

AUX1 : 7.1CH :

RETURN NEXT EXIT

You can select “MAIN ROOM”, “MULTI ROOM”,

“REMOTE”

“DISABLE” with the 1

2 cursor

buttons.

Note:

• REMOTE is available for the external control. The

RC5001SR cannot operate the function.

Select desired input source with the 3

cursor buttons.

Set to “ON” or “OFF” with the 1

2 cursor

buttons.

After you complete this portion of the setup,

move the cursor to “RETURN” with the 3

cursor button and press the ENTER button.

Note:

• When an input source that is on in the set room is

selected, voltage is output to the DC TRIGGER

output terminal.

SR6001N DFU_1_ENG 2_4.indd 40SR6001N DFU_1_ENG 2_4.indd 40 06.12.21 3:10:59 PM06.12.21 3:10:59 PM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Comments to this Manuals

No comments

Marantz SR6001 User Manual Page 44

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR6001