Marantz DV-12S2 User Manual download pdf (Page 3)

Deutsch

Italiano

English

Français

FOREWORD

This section must be read carefully before any connection is made to

the mains supply.

WARNINGS

Do not expose the equipment to rain or moisture.

Do not remove the cover from the equipment.

Do not insert anything into the equipment through the ventilation holes.

Do not handle the mains lead with wet hands.

Make a space of about 0.1 meter around the unit.

CE marking

This product is in conformity with the EMC directive and

low-voltage directive.

EQUIPMENT MAINS WORKING SETTING

Your Marantz product complies with the household power and safety

requirements in your area.

IMPORTANT: (FOR UK version only)

This apparatus is fitted with an approved moulded 13 Amp plug. To

change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved

type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off

and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5A. If a

plug without a fuse is used, the fuse at the distribution board should not

be greater than 5A.

NOTE : The severed plug must be destroyed to avoid a possible shock

hazard should it be inserted into a 13A socket elsewhere.

HOW TO CONNECT A PLUG

The wires in the mains lead are coloured in accordance with the following

code:

BLUE—”NEUTRAL” (“N”)

BROWN—”LIVE” (“L”)

1. The BLUE wire must be connected to the terminal which is marked with

the letter “N” or coloured BLACK.

2. The BROWN wire must be connected to the terminal which is marked with

the letter “L” or coloured RED.

3. Do not connect either wires to the earth terminal in the plug which is

marked by the letter “E” or by the safety earth symbol or coloured

green or green-and-yellow.

Before replacing the plug cover, make certain that the cord grip is clamped

over the sheath of the lead — not simply over the two wires.

PRECAUTIONS

The following precautions should be taken when operating the equipment.

GENERAL PRECAUTIONS

When installing the equipment ensure that:

– the ventilation holes are not covered.

– air is allowed to circulate freely around the equipment.

– it is placed on a vibration-free surface.

– it will not be exposed to excessive heat, cold, moisture or dust.

– it will not be exposed to direct sunlight.

– it will not be exposed to electrostatic discharges.

In addition, never place heavy objects on the equipment.

If a foreign object or water does enter the equipment, contact your nearest

dealer or service center.

Do not pull out the plug by pulling on the mains lead; grasp the plug.

It is advisable when leaving the house, or during a thunderstorm, to

disconnect the equipment from the mains supply.

This product incorporates copyright protection technology that is

protected by method claims of certain U. S. patents and other

intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology

must be Authorized by Macrovision Corporation, and is intended for

home and other limited viewing uses only unless otherwise

authorized by Macrovision corporation. Reverse engineering or

disassembly is prohibited.

DV-12S2.4L.001.009 8/6/03, 9:08 PM3

1 2 3 4 5 6 7 8 ... 187 188

Comments to this Manuals

No comments

Marantz DV-12S2 User Manual Page 3

Comments to this Manuals

Related products and manuals for Video Marantz DV-12S2