Marantz SR6001 User Manual download pdf (Page 63)

59

ENGLISH

HDMI

SYMPTOM CAUSE REMEDY

The display does not

appear over an HDMI

connection.

The connected monitor or projector

does not support HDCP.

The HDMI input of on the TV is

not on.

Set HDMI input so that it turns on, as

explained in the TV's instruction manual.

The HDMI output on the source

component (DVD, Set Top Box,

etc.) is not on.

Set HDMI output so that it turns on, as

explained in the source component's

instruction manual.

The HDMI mode is not correctly

set on the SR6001.

Set HDMI input on the FUNC INPUT

SETUP menu as explained on page 28.

The HDMI output video resolution

of the source component (DVD,

Set Top Box, etc.) does not match

the TV speciﬁ cations.

Set the resolution so that it matches, as

explained in the instruction manuals of both

components.

The device is connected with a

non-standard HDMI cable.

A 5 m or shorter cable is recommended to

ensure stable operation and prevent image

quality deterioration.

Power to the SR6001 is off.

(When the SR6001 is on standby,

HDMI connections cannot be

turned on.)

Turn on the power to the SR6001.

The connection between

HDMI components was not

authenticated.

Shut off and then turn the power back on to

the SR6001, TV and source component.

Time is needed for the

display of an HDMI

connection to appear.

The connection is being

authenticated between the HDMI

devices.

There is nothing wrong with the system.

Some HDMI devices require time for

authentication.

Audio is not played

back over an HDMI

connection.

The HDMI audio output of the

source component (DVD, Set Top

Box, etc.) is not on.

Set the HDMI audio output so that it turns

on, as explained in the source component's

instruction manual.

The signal format of the source

component (DVD, Set Top Box,

etc.) is not supported by the

SR6001.

Set the HDMI audio output so that it can

connect to the SR6001, as explained in the

source component's instruction manual.

The SR6001 is set to the HDMI

audio “THROUGH” mode.

In the “THROUGH” mode, sound is not

produced from the SR6001. Set it to

“ENABLE”. (see page 39)

DVD-Audio is not played

back over an HDMI

connection.

The DVD player does not support

CPPM, therefore it cannot output

HDMI audio.

• Use a DVD-Audio player that supports

CPPM.

• Turn on PCM downsampling on the DVD

player.

• Use an analog connection.

SR6001N DFU_1_ENG 4_4.indd 59SR6001N DFU_1_ENG 4_4.indd 59 06.12.21 3:12:22 PM06.12.21 3:12:22 PM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments