Marantz SR7002 User Manual download pdf (Page 26)

ENGLISH

11.

Once copying is completed, press the M button

on both remote controllers.

SETUP

SETTING THE LIGHTING TIME

• The LCD lights up when the LIGHT buttons are

pressed. The LCD remains lit while the pressed

button is held down, and it goes off when the

button is released.

• The LCD continues to light up if another button

is pressed while it is lit or if pressed within two

seconds after the light goes off.

• The lighting time can be set in one-second units

from 0 to 60 seconds.

The LIGHT buttons have light-absorbing properties

that enable them to store light. If the buttons are no

longer illuminated in a dimly lit environment, bring the

buttons near a ﬂ uorescent lamp or other light source

for a sufﬁ cient amount of time. This should illuminate

the buttons again.

• The LIGHT buttons consist of a LIGHT1 and

LIGHT2 button, and they both perform the same

operation.

The factory default lighting time is set to 15 seconds.

This example shows how to set the lighting time to

20 seconds.

LEARN

NAME

MACRO

USE

PAG E

123

2 3 4

LEARN

NAME

MACRO

USE

PAG E

123

LEARN

NAME

MACRO

USE

PAG E

123

Hold down the M button for three seconds or

more.

The menu is displayed.

Press the > button to display the second page

SETUP menu.

Press the D1 (LIGHT) direct button .

The LIGHT is displayed on the LCD

Press the 3 or 4 cursor button to set the

lighting time.

Press the OK cursor button to enter the lighting

time.

Once the setting is finished, press the M

button.

SETTING THE MACRO INTERVAL TIME

When a macro program is executed, control signals

are transmitted in sequence. This transmission

interval (interval time) can be set in 0.5-seconds units

from 0.5 to 5 seconds.

If the interval time is set in this Setup mode, the

interval times for all programmed macros are

changed. If necessary, use EDIT (see page 60) in the

macro program to change the individual transmission

times.

The factory default setting for the transmission

interval is 1 second.

This example shows how to set the interval time to

5 seconds.

LEARN

NAME

MACRO

USE

PAG E

123

2 3 4

LEARN

NAME

MACRO

USE

PAG E

123

LEARN

NAME

MACRO

USE

PAG E

123

Hold down the M button for three seconds or

more.

The menu is displayed.

Press the > button to display the second page

SETUP menu.

Press the D2 (I-TIME) direct button.

Press the 3 or 4 cursor button to set the

interval time.

Holding down the cursor button fast-forwards the

time indicator.

Press the OK cursor button to enter the interval

time.

Once the setting is finished, press the M

button.

ADJUSTING THE DISPLAY CONTRAST

The contrast of the LCD can be adjusted. Adjust

for maximum visibility according to your viewing

environment.

LEARN

NAME

MACRO

USE

PAG E

123

2 3 4

LEARN

NAME

MACRO

USE

PAG E

123

LEARN

NAME

MACRO

USE

PAG E

123

Hold down the M button for three seconds or

more.

The menu is displayed.

Press the > button to display the second page

SETUP menu.

Press the D3 (CONT) direct button .

Press the 3 or 4 cursor button and set the

display contrast for maximum visibility.

The adjustment has 10 levels.

The factory default setting for the contrast is the ﬁ fth

level.

Press the OK cursor button to enter the display

contrast.

Once the setting is finished, press the M

button.

SR7002-8002_U_01_ENG 1_3.indd 23SR7002-8002_U_01_ENG 1_3.indd 23 07.8.24 1:14:54 PM07.8.24 1:14:54 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 93 94

Comments to this Manuals

No comments

Marantz SR7002 User Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR7002