Marantz SR7002 User Manual download pdf (Page 73)

ENGLISH

After selecting the ﬁ rst character to be entered,

press the MEMORY or ENTER button, or press

the MEMO button on the remote controller.

The entry in this column is ﬁ xed and the next

column starts to ﬂ ash. Fill the next column the

same way.

To move back and forth between the characters,

press the 1 / 2 cursor buttons or press CH+ or

CH– button on the remote controller.

Note:

• Unused columns should be filled by entering

blanks.

To save the name, press the MEMORY or

ENTER button on the front panel, or press the

MEMO button on the remote controller for more

than 2 seconds.

Instead of using the 3 and 4 cursor buttons

or the SCAN+ and SCAN– buttons of the

remote controller unit to select characters,

characters can be input from the numeric keys

of the remote controller. See the below table

for a correspondence between characters and

numeric keys.

Ten keypad Press, press again, press again, etc.

A → B → C → 1 → A

D → E → F → 2 → D

G → H → I → 3 → G

J → K → L → 4 → J

M → N → O → 5 → M

P → Q → R → 6 → P

S → T → U → 7 → S

V → W → X → 8 → V

Y → Z → space → 9 → Y

– → + → / → 0

Note:

On the SR8002, when the unit receives HD Radio

and RBDS broadcasts, the HD Radio and RBDS text

data is displayed. Therefore, the preset station names

entered with this function are not displayed.

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel

to be entered using alphanumeric characters.

Before name inputting, you need to store preset

stations with the preset memory operation.

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR8002

M-DAX

PURE DIRECT THX

7.1CH INPUT

MODE AUTO

MULTI

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/OFF

ENTER

SL S SR

LFE

DIGITAL

SURROUND

V-OFFDISP MULTI AU TO TUNED ST SPKR A B

NIGHT

PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR DIRECT

AUTO

DISC 6.1 MTX 6.1 EQ

PCM

AAC

5. 2.

SOURCE

LEARN

NAME

MACRO

USE

PAGE

1 2 3

VOL

MUTE

LIP.SYNC

MEMO

CLEAR

THX

MEMO

Recall the preset number to be inputted name

with the method described in “Recalling” a

preset station.

Press the MEMORY button on the front panel

or press the MEMO button on the remote

controller for more than 3 seconds.

The left most column of the station name

indicator ﬂ ashes, indicating the character entry

ready status.

When you press the 3 or 4 cursor buttons on

the front panel or the SCAN+ or SCAN– buttons

on the remote controller (page 4), alphabetic

and numeric characters will be displayed in the

following order:

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +

→ / → (Blank) → A

UP →

→ DOWN

FOR LISTENING TO HD Radio STATIONS

(SR8002 ONLY)

HD Radio technology brings digital radio to

conventional analog AM and FM radio stations, with

improved sound quality, better reception, and new

data services.

HD Radio technology provides CD-quality sound for

FM stations, and FM-quality sound for AM stations.

In addition, FM HD Radio stations can transmit

multiple programs on the same frequency by using

multicast channels.

Text data display incudes station name, song title,

artist name, and so on.

For more information about HD Radio technology,

visit: www.ibiquity.com

TUNING MODE

HD Radio stations transmit analog and digital signals

for broadcast programs.

You can change the TUNING mode to the desired

signal type.

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

M-DAX

A/B

T-MODE

MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

SL S SR

LFE

DIGITAL

SURROUND

-OFF

NIGHT

PEAK ANALOG

DIGITAL

ATT

.1 EQ

PCM

AAC

VOL

USE

PAGE

DSS

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

VCRDVD

LIGHT

Learning Remote Controller

RC8001SR

TUNER

Press the > button on the remote controller to

display Page 2.

Each time the T-MODE (D4) button is pressed,

the TUNER mode changes and the mode is

displayed on the FL display.

Analog/Digital Auto Mode

T-MODE:DIG-AT

Use this mode when listening to HD Radio stations.

(It is recommended that you normally use this

mode.)

AUTO STEREO mode is selected and the AUTO

indicator is illuminated on the FL display.

When stereo broadcasts are received, the ST

indicator is illuminated on the FL display.

When an HD Radio (digital) signal is received, the

DIGITAL indicator is illuminated on the FL display.

Note:

In this mode, if the strength of the HD Radio signal is

weak, the unit automatically changes to Analog mode

to receive the analog signal.

Analog Auto Mode

(when receiving FM broadcasts)

T-MODE:ANA-AT

In this mode, the unit receives only analog signals

and changes to AUTO STEREO mode.

See p.68 for more information on Analog received.

(Only analog broadcasts are received.)

Notes:

• In this mode, HD Radio signals cannot be received.

(Only analog broadcasts are received.)

• This mode is not available when BAND is set to

AM.

Analog Mono Mode

T-MODE:MONO

In this mode, the unit receives only analog signals

and changes to Monaural mode.

See p.68 for more information on Analog Mono

Mode.

Note:

In this mode, HD Radio signals cannot be received.

(Only analog broadcasts are received.)

SR7002-8002_U_01_ENG 3_3.indd 70SR7002-8002_U_01_ENG 3_3.indd 70 07.8.24 1:16:09 PM07.8.24 1:16:09 PM

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 93 94

Comments to this Manuals

No comments

Marantz SR7002 User Manual Page 73

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR7002