Marantz SR7002 User Manual download pdf (Page 50)

ENGLISH

Checking Measurement Results

When calculations for the measurement results

end, a screen appears for confirming the

calculation results.

CHECK RESULT

SPEAKER CONFIG

SPEAKER SIZE

DISTANCE

CHANNEL LEVEL

CROSSOVER FREQ

STORE

EXIT

Select items to check with the 3/4 cursor

buttons and press the OK/ENTER button to

enter them.

Note:

To check equalizer (MultEQ) parameters, see page

57.

[Example]

Conﬁ rmation screen for speaker detection

SPEAKER CONFIG

CHECK !! SPEAKER

FRONT : YES

CENTER : NON

FRONT R : YES

SURR.R : YES

SURR.B R : NON

SURR.B L : NON

SURR.L : YES

SUB W : YES

RETURN NEXT

[Example] Conﬁ rmation screen for the distance from

speakers to the listening position

DISTANCE

UNIT : ft

FRONT L : 30.00ft

CENTER : 19.33ft

FRONT R : 29.66ft

SURR.R : 21.50ft

SURR.B R : 12.33ft

SURR.B L : 11.66ft

SURR.L : 16.33ft

SUB W : 12.50ft

RETURN NEXT

* The units can be changed by moving the cursor to

[ft] of UNIT and pressing 1 / 2 the cursor buttons.

Each time a 1 / 2 cursor button is pressed, the units

alternate between [ft] (feet) and [m] (meters).

the OK/ENTER button.

Note:

Pressing “EXIT” prior to pressing “STORE” erases all

measurement results and calculation results, therefore

operate the remote controller with care.

When storing operations end, the following OSD

appears on the display.

2.SPKR SETUP

AUTO SETUP

MANUAL SETUP

THX AUDIO SETUP

RETURN EXIT

Notes:

• Do not turn the power to the unit off while storing

parameters in memory. This may erase all data in the

unit’s memory and may damage the unit.

• Please set any THX Certiﬁ ed speakers manually to

“Small” and the crossover “80 Hz” after Auto setup

operation.

[Example] Conﬁ rmation screen for speaker size and

crossover frequency

SPEAKER SIZE

FRONT L : AUTO

CENTER : AUTO

FRONT R : AUTO

SURR.R : AUTO

SURR.B R : AUTO

SURR.B L : AUTO

SURR.L : AUTO

RETURN NEXT

CROSSOVER FREQ

FRONT : AUTO

CENTER : AUTO

SURR : AUTO

SURR.B : AUTO

RETURN

* AUTO is displayed to indicate that the speaker size

and crossover frequency results were automatically

measured.

10.

Storing Measurement Results in Memory

Once finished confirming the measurement

results, select “RETURN” with the 3/4 cursor

buttons and press the OK/ENTER button to

display the CHECK RESULT screen.

CHANNEL LEVEL

FRONT L : 0.0dB

CENTER : -6.5dB

FRONT R : -1.5dB

SURR.R : +1.0dB

SURR.B R : +9.5dB

SURR.B L : +12.0dB

SURR.L : -2.5dB

SUB W : -12.5dB

RETURN NEXT EXIT

CHECK RESULT

SPEAKER CONFIG

SPEAKER SIZE

DISTANCE

CHANNEL LEVEL

CROSSOVER FREQ

STORE

EXIT

Place the cursor on “STORE” and press the

OK/ENTER button to store all parameters

including the equalizer parameters in memory.

If not wanting to store the calculation results in

memory, place the cursor on “EXIT” and press

SR7002-8002_U_01_ENG 2_3.indd 47SR7002-8002_U_01_ENG 2_3.indd 47 07.8.24 1:15:24 PM07.8.24 1:15:24 PM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 93 94

Comments to this Manuals

No comments

Marantz SR7002 User Manual Page 50

Comments to this Manuals

Related products and manuals for AV receivers Marantz SR7002