Marantz DV4100 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 143
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
56
In this example 23 is the hexidecimal code of the pressed RC
key. The user can leave the remote-control test by pressing
NEXT on the local keyboard of the DVD player. The remote
control test is successful if a code was received before the user
pressed the NEXT key; pressing the NEXT key before pressing
a key on the remote control gives an error in the remote control
test (note that the remote control test will also fail if a key on the
remote control was pressed but no code was received). The
remote control test does not check upon the contents of the
received code, that is it will not be checked if the received code
matches the key pressed. If desired, the user can manually
check this code by using a code-table for the remote control
key-codes.
Figure 14-7
After pressing NEXT, the result of the remote control test is
displayed on the local display of the DVD player as follows:
Figure 14-8
Or
Figure 14-9
Pressing NEXT on the local keyboard again will proceed to the
next test.
14.2 MONO PCB DIGITAL PART
14.2.1 PICTURE TEST
The picture test is performed by putting a predefined picture
(colour bar) on the display (nucleus VideoColDencOn) and
asking the user for confirmation. The display will show the
following message:
Figure 14-10
By pressing PLAY the user confirms the test, pressing PAUSE
will indicate the picture was invisible or incorrect. Pressing
NEXT will proceed to the next test
14.2.2 SOUND 1 & SCART DVD TEST
The first soundtest is performed by starting a pink noise sound
that needs confirmation from the user (nucleus
AudioPinkNoiseOn); the display will show the following
message very shortly:
Figure 14-11
This sound will only be audible from version cut3.1 of
Sti5505(item7503 on mono board) onwards. After starting up
sound 1, SCART loop-trough will be simultaneously active
during this test. SCART loop-trough will be measured with the
aid of an external video source.
When entering the SCART loop-trough, the local display
indicates:
RC Key id Hexadecimal code
STANDBY
C
STOP
31
PLAY
2C
PAUSE
30
NEXT
20
PREVIOUS
21
CURSOR UP
58
CURSOR DOWN
59
CURSOR LEFT
5A
CURSOR RIGHT
5B
OK
5C
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
ANGLE
85
AUDIO
4E
SUBTITLES
4B
ROOT MENU
54
OSD ON/OFF
F
RETURN
83
SHUFFLE
1C
REPEAT
1D
A/B REPEAT
3D
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 142 143

Comments to this Manuals

No comments