Marantz DV4100 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 143
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
61
14.5 Servicing DVD module and MONO board
The DVD module(Basic Engine and the mono board) has to be
exchanged completely in case of failure. A new module for
DV4100 can be ordered with codenumber 3104 129
51980.
14.5.1 Reprogramming of new mono boards.
Figure 14-29
14.5.2 Reset of Virgin Mode
After the player has been powered up for test by the dealer, it
would have gone through the Virgin Mode. It is possible to reset
the settings made during that mode before the delivery of
player to the customer. This can be done as shown in the
following diagram:
Figure 14-30
Figure 14-31
Caution
This information is confidential and may not be distributed. Only a qualified service person should
reprogram the mono board
.
After replacement of the mono board, all the customer settings and also the region code will be lost.
Reprogramming of the mono board will put the player back in the state in which it has left the factory,
i.e. with the default settings and the allowed region code.
Reprogramming will be done by way of the remote control.
Put the player in stop mode, no disc loaded.
Reprogramming is limited to 25 times
When the counter reaches 25, reprogramming is not possible anymore
Press the following keys on the remote control:
<
PLAY
> followed by numerical keys
<2> <7> <4>
The display shows: “
- - - - - - - - - - -
Press now successively the following keys :
for DV4100/A1B :
<0><1><5> <0><0><0><0><0><0><0><0><0> PAL / NTSC
for DV4100/N1B :
<0><1><2> <0><0><0><0><0><0><0><0><0> PAL / NTSC
for DV4100/S1G :
<0><1><3> <0><0><0><0><0><0><0><0><0> PAL / NTSC
for DV4100/U1B :
<0><1><0> <0><0><0><0><0><0><0><0><0> PAL / NTSC
Press <
PLAY
> again.
The TV screen will become BLUE during a short time to confirm that the mono board has been
reprogrammed, then the set goes to standby mode.
DISCONNECT FROM MAINS
PRESS 2 KEYS
SIMULTANEOUSLY
<PREVIOUS> + <OPEN/CLOSE>
CONNECT TO MAINS
VIRGIN MODE IS RESET
TV SCREEN SHOWS
VIRGIN MODE MENU
DISCONNECT FROM MAINS
IF TRADE MODE OFF
PRESS 2 KEYS
SIMULTANEOUSLY
<PLAY> + <OPEN/CLOSE>
CONNECT TO MAINS
DISCONNECT FROM MAINS
IF TRADE MODE ON
PLAYER IS IN NORMAL MODE
WHEN PRESSING FRONT
KEYS, THE PLAYER WILL
RESPOND
PRESS 2 KEYS
SIMULTANEOUSLY
<PLAY> + <OPEN/CLOSE>
CONNECT TO MAINS
PLAYER IS IN TRADE MODE
WHEN PRESSING FRONT
KEYS, THE PLAYER
DOESN'T RESPOND
TRADE MODE
When the player is in Trade Mode, the player cannot be
controlled by means of the front key buttons, but only by means
of the remote control.
For /U1B with old DVD module "VAE3000". (Production
WEEK36 or earlier)
For other DV4100
Please refer the DVD Module ADS-1 Service Manual (3122 785
10840) attached with this Service Manual.
For servicing DVD Module ADS-1, the service application
softwear "ComPair" is necessary.
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 142 143

Comments to this Manuals

No comments